Кофемашина Melitta Caffeo CI E 970-101 Silver - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
24
Accessories
• 1 milk tube or 1 milk container including
milk tube
(depending on the model)
• 1 Coffee scoop with screw-in aid for the
water
fi
lter
Before using for the
fi
rst time
General information
• Only use pure water without
carbonation.
• Use the supplied test strip to determine
the hardness of the water used and set
the water hardness (Page 30).
Information for using for the
fi
rst
time
When using for the
fi
rst time, the
appliance may only be switched on
without a Melitta
®
Claris
®
water
fi
lter.
Starting up the appliance
Switching on for the
fi
rst time
Warning!
Danger of
fi
re and electric shock
due to incorrect supply voltage,
incorrect or damaged connections
and power cable.
–
Ensure that the supply voltage
corresponds to the supply voltage
speci
fi
ed on the identi
fi
cation label of
the appliance. The identi
fi
cation label is
located on the right side of the appliance
behind the cover (Figure
B
,
13
).
–
Make sure that the power socket meets
the applicable standards for electrical
safety. If in doubt, contact a quali
fi
ed
electrician.
–
Never use damaged power cables
(damaged insulation, bare wires).
• Place the appliance on a stable, dry and
level surface with suf
fi
cient clearance (at
least 10 cm) to the sides.
• Plug the power cable into a suitable
power socket.
• Press the
button to switch on the
appliance.
After switching on,
fi
rst set the language
and then the time.
• Turn the rotary switch (Figure
A
,
10
)
to selective the respective setting
(language, hour, minute).
• Press the rotary switch to save the each
setting.
After making the settings,
fi
ll the bean
container:
• Filling the bean container („Filling the
bean container“, page 25).
• Press the rotary switch.
Then
fi
ll the water reservoir:
• Raise the lid of the water reservoir
6
and
pull the water reservoir up and out of the
appliance.
• Fill the water reservoir with fresh tap
water only up to the max. mark.
• Insert the water reservoir into the
appliance.
• Press the rotary switch.
• Place a vessel under outlet
3
.
• Press the rotary switch. First, an
automatic rinsing is carried out. The
appliance is ready for operation when
the buttons illuminate.
BA_CI_042015.indd 24
BA_CI_042015.indd 24
20.04.2015 20:45:11
20.04.2015 20:45:11
