Krups EA891D - Инструкция по эксплуатации - Страница 30

Automatic cleaning programs
Automatic cleaning program of the coffee circuit

A message on the screen will indicate when a cleaning program needs to be run for the appliance.
To run this cleaning program, you will need a container which holds at least 0.6 l, and which should be placed beneath 
the coffee outlets and the steam nozzle, and a KRUPS cleaning tablet. 

Fig. 37

. Carefully follow the instructions given 

on the screen. It is also possible to run a cleaning cycle via the Maintenance menu.

!

Important

:  You do not have to run the cleaning program as soon as the appliance requests it, but it must be 

done reasonably soon after. If cleaning is postponed, the alert message will remain illuminated until 
the process is completed.

The automatic cleaning program comprises two phases: a cleaning cycle and a rinsing cycle, and lasts about 13 
minutes.

!

Important

:  If you unplug your machine during the cleaning cycle, or if there is a power failure, the cleaning program 

will continue from the current phase when the power is returned. It is not possible to postpone this 
process. This is essential to ensure that the water circuit has been correctly rinsed. In this case, a new 
cleaning tablet may be necessary. Complete the full cleaning program in order to remove all of the 
cleaning product which is harmful to health.

Cleaning the “One Touch Cappuccino” block

To complete a cleaning program, you will require two containers (minimum 0.6 L) and KRUPS cleaning liquid.
You can start the cleaning cycle by pressing button 

.

Then selecting “Maintenance” 



 “Milk Cleaning”. Follow the instructions on the screen.

Dismantling the “One Touch Cappuccino” block

In addition to rinsing, it is necessary to clean the different elements of the block every time after using. To dismantle 
the block, follow the following instructions: 
Remove the milk tube, 

Fig. 21

. 

Remove the front lid of the coffee milk nozzles. Slide it downwards and pull it towards you.  

Fig. 22

.

Remove the “One Touch Cappuccino” block by pulling the upper part of the block and pull the orange cleaning tool 

Fig. 23

.

Completely dismantle the block. 

Fig. 24

. 

Remove the milk tube connector 

Fig. 27

.

Clean all of the dismantled parts (block, connector and milk tube) with soapy water. Then rinse them in hot water. 

Fig. 28

.

Once the elements are clean and dry, assemble the block and return them to their original position. 

fig.31-32-33

Replace the font lid of the block. 

Fig. 34

. Replace the connector in the milk tube 

Fig 35

 (opposite side of the bevelled 

side) and plug in the block. 

Fig. 36

.

Automatic descaling program of the steam circuit

Warning

:  if your appliance is fitted with our Claris - Aqua Filter System cartridge, remove the cartridge before 

descaling.

A message on the screen will indicate when a descaling program needs to be run for the appliance. The frequency of 
this program depends on the quality of the water used and on whether a Claris Aqua Filter System filter is used or not 
(the harder the water, the more often the appliance has to be descaled).

!

Important

:  You are not obliged to carry out this program immediately the appliance requests it, but it must be 

carried out reasonably soon afterwards. If descaling is postponed, the alert message will continue to 
be displayed until the process is completed.

When the descaling alert level is reached and displayed, press 

 to run the descaling program. To delay it, press  

.

Once the procedure has been launched, follow the instructions provided on the screen. It is also possible to run a 
descaling cycle via the “Maintenance” menu 



 “Descaling”.

To carry out a descaling program, you will require a container with a capacity of at least 0.6 L which should be placed 
beneath the One Touch Cappuccino block and a KRUPS descaling sachet (40 g). 

Fig. 37

Fill the water tank up to the CALC mark then pour in the contents of one sachet of descaler.
The descaling program comprises three phases: a descaling cycle and two rinsing cycles. The program lasts 
approximately 20 minutes.

28