Krups EA850B30 Falcon One Touch - Инструкция по эксплуатации - Страница 10

12

The grinding setting is useful when you change coffee type or if you would like a stronger or
weaker coffee. It is not recommended that you perform this setting systematically.

Preparing drinks: Espresso  

This chapter explains how the appliance operates using the example of the Espresso function.
Press the “

Espresso

” button.

If the appliance detects a lack of water when you request a recipe, it will ask you to fill the tank.
Place the cup(s) under the coffee spouts.
You can adjust the height of the coffee outlet depending on the size of your cup(s). 

Fig. 10.

Possible settings

The appliance lets you prepare one or two cups.
Selecting the strength: the more beans selected the coarser the preparation. You can change
the strength using the 

–

and 

+

buttons located to the left and right of the symbols. Press the

“

OK

” button on the touch screen to launch the preparation.

Preparing an espresso

The appliance grinds the beans, compacts the coffee grounds and performs percolation.
It is possible to adjust the volume of coffee in preparation using the 

-

and 

+

buttons.

You can stop the preparation at any time by pressing “

STOP

”. Caution, pressing stop causes

an appliance resetting phase that can last up to 30 seconds. This is normal.
When a cycle is interrupted, the appliance does not stop immediately, the appliance will finish
its cycle but the preparation will be cancelled.

Caution! : Automatic rinsing of the coffee nozzle

Depending  on  the  type  of  recipes  prepared,  the  appliance  may  carry  out  an  automatic
rinsing operation when it is switched off.

The cycle lasts only a few seconds and will stop automatically.

Preparing other drinks: cappuccino / latte

THE "ONE TOUCH CAPPUCCINO" BLOCK

This "One Touch Cappuccino" block facilitates preparation of a cappuccino or a caffè latte. 

- Preparing your appliance:

Connect the milk suction pipe on the left to the "One Touch Cappuccino" block. Place the other
end in a container filled with milk 

Fig. 11

.

Position  your  cup  and  set  the  button  on  the  block  to  the  desired  position:  cappuccino 

or

latte 

Fig. 12.

- Settings and making drinks

Press the 

"Cappuccino Latte"

button.

All settings can be modified. 
For each cappuccino, the machine will take into account the last recipe used.
Once the settings have been defined, press 

OK

. 

The steam is used to froth up the milk. As the production of steam requires a high temperature,
the appliance has an additional pre-heating phase.
The following stages are automatically sequenced: frothing of the milk, grinding of the coffee
and preparation of the coffee. 
Your drink is ready for you to enjoy 

Fig. 13

.

!

IFU_KR_EA85_EE_0A17616_EA85  09/09/13  17:50  Page12