Krups EA8245PN Compact Espresseria - Инструкция по эксплуатации - Страница 22

17

ENGLISH

Do not fill the water tank with hot water, milk or any other liquid.

 If you turn on the 

appliance when the water tank is not in place or not correctly filled (under the “min.” 
level,), the “fill water tank” light will come on and making an espresso or a cup of coffee 
will be made impossible.

First use / setting up the appliance

Use the rotating button to select a function, increase or reduce values. Confirm your choice 
using the 

OK

 key.

Press “On / Off” to turn your appliance on. Follow the instructions that appear on the “choice 
of language” screen - 

Fig. 10

. Use the rotating button - 

Fig. 11

, to choose a language 

(highlighted) - 

Fig. 12

.

Press the 

OK

 key to validate - 

Fig. 13

.

When you first use your appliance, it will ask you to set several parameters. If you unplug 
your appliance, you will again be asked for some of these parameters.
The appliance will ask you to set:

Language

You can select your chosen language from those offered.

Measurement unit

Choose either ml or oz as your measurement unit.

Date

You must set the date.

Clock

You can choose between 12 hour or 24 hour time display.

Auto-off

You can choose the period after which your appliance will stop 
automatically.

Auto-on

You can automatically start pre-heating of your appliance at your 
chosen time.

Water hardness

You must set your water hardness between 0 and 4. See “Water 
hardness measurement” section.

Filter

You must indicate whether a filter is fitted or not (Claris – Aqua 
Filter System cartridge)

When being used for the first time, it is possible that the machine will ask to be filled up. Just 
follow the instructions on the screen.

Rinsing of circuits

Rinsing out the coffee circuit :

Once you have turned the machine on and the preheating stage has completed, you can 
rinse out the coffee circuit. Place a container under the coffee outlets then select 

“YES”

from the menu proposed.

Rinsing out the steam circuit :

Place a container under the steam nozzle. Press the   key to rinse the steam circuit - 

Fig.  14

. The rinsing cycle will stop automatically after the volume of water displayed has 

flowed through.
Press 

 at any time to display menus to perform rinsing and then select 

MAINTENANCE 

=> OK => RINSING

.

It is best to perform rinsing after the appliance has remained unused for several days.

WHEN RINSING PROCESS IS IN PROGRESS, HOT WATER COMES OUT THROUGH 
THE NOZZLES. BE CAREFUL NOT TO BE SCALDED.