Gorenje Plus GCC800X - Инструкция по эксплуатации - Страница 32

EN 34

T R O U B L E S H O O T I N G

Faults table

If the appliance does not work properly, this does not always mean that 

it is defective. If the coffee machine does not work and a message is 

displayed, refer to the problem solving information of chapter 7. If no 

message is displayed, try to fi nd a solution fi rst by checking the points 

mentioned in the table below, or contact the service department. (See 

the guarantee certifi cate for details.)

FAULT

CAUSE

SOLUTION

Coffee is not hot.

The cups were not preheated.

The brewing unit is too cold.

Preheat the cups by rinsing 

them out with warm water 

(see “Tips to make hotter 

coffee”).

Warm up the brewing unit 

with the rinsing program 

before making coffee (see 

“Rinsing”).

The coffee does not have 

enough crema.

The coffee is too coarsely 

ground.

The coffee blend is not 

suitable.

Turn the knob for the grind 

level setting one position anti-

clockwise (see “Setting the 

grind level”).

Use a coffee blend suited 

to fully automated coffee 

machines.

Coffee comes out too slowly.

The coffee is ground too fi ne.

Turn the knob for the grind 

level setting one position 

clockwise (see “Setting the 

grind level”).

Coffee comes out too 

quickly.

The coffee is too coarsely 

ground.

Turn the knob for the grind 

level setting one position anti-

clockwise (see “Setting the 

grind level”).

Coffee only comes out of one 

of the spouts on the coffee 

dispenser.

The holes on the spouts are 

blocked.

Remove the dry coffee 

residues with a needle 

(see “Cleaning the coffee 

machine”).