Zelmer 13Z018 - Инструкция по эксплуатации - Страница 112

  112

CAUTION! During programming pay attention if the 

 or 

 indicator are flashing. If they stop flashing for any 

reason the 

 or 

 stops flashing, start programming mode again by pressing and holding both the 

single/double cup select button 

 (B) and temperature select button 

 (D) for 2 seconds and follow the 

steps up to paragraph 11.16. 

CAUTION! In order to delete the program 

 or 

 settings press and hold both the temperature select button 

(D) and the steam select button 

 (E). 

13. Making espresso using the memory function 

13.1. Unplug the espresso machine from the power supply. 
13.2. Fill the water tank 

(1)

 according to 

paragraph 4

. 

13.3. Plug the espresso machine by putting the cord into the socket. The machine will turn on. The display panel and 

the power on/off button 

(A)

 will flash. The display panel will indicate power is on 

. 

13.4. Push the power on/off button 

(A)

. You will hear a sound signal. 

13.5. The 

 indicator on the display panel will begin to whirl, signalizing that the espresso machine is heating up. 

13.6. When  the 

 indicator stops whirling, you will hear a sound signal informing you that the machine is ready for 

use (has reached the right temperature). 

13.7. Select program 

 or 

 by pressing the coffee amount select button 

(C) – 

see 

paragraph 8

. 

13.8. Depending on which coffee mode (ground or instant bags) has been programmed for 

 or 

, pour ground 

coffee by means of a measuring cup 

(14)

 or insert espresso instant bags into the filter handle container 

(7)

. 

13.9. Remove the excess of coffee from the edge of the filter and compress the coffee by the permanent coffee 

compressor 

(6)

 or the whip of the measuring cup 

(14) (Fig. 4)

. 

13.10. Attach filter handle 

(7)

 to the brew head 

(5)

, by turning it with a firm motion to the right 

(Fig. 3)

. 

13.11. Place a cup or cups on the drip tray grid 

(8)

, directly under the brew head 

(5)

. 

13.12. Push the brew coffee button 

(F)

 and espresso will come out of the machine. The display panel will 

indicate 

 (after choosing a double cup) or 

 (after choosing a single cup). 

13.13. The brewing process will be automatically stopped at the desired amount of coffee. You will hear two sound 

signals and the display panel will indicate 

 or 

 (depending on the settings of program 

 or 

). 

13.14. Remove the filter handle by turning it to the left 

(Fig. 5)

 and throw out the used bag or coffee grounds 

(Fig. 6)

. 

Clean the filter with water 

(Fig. 7)

. 

14. Making hot water 

Hot water mode is perfect for making e.g. hot chocolate, filling up a piston coffee pot or a teapot. 

14.1. Unplug the espresso machine from the power supply. 
14.2. Fill the water tank 

(1)

 according to 

paragraph 4

. 

14.3. Plug the espresso machine by putting the cord into the socket. The machine will turn on. The display panel and 

the power on/off button 

(A)

 will flash. The display panel will indicate power is on 

. 

14.4. Push the power on/off button 

(A)

. You will hear a sound signal. 

14.5. The 

 indicator on the display panel will begin to whirl, signalizing that the espresso machine is heating up. 

14.6. When  the 

 indicator stops whirling, you will hear a sound signal informing you that the machine is ready for 

use (has reached the right temperature). 

14.7. Push the steam select button 

(E)

. You will hear a sound signal. The display panel will indicate 

informing that the steam mode has been turned on. Push the steam select button 

(E) 

again. You will hear 

a sound signal and the display panel will indicate 

.. 

14.8. The 

 indicator on the display panel will begin to whirl, signalizing that the espresso machine is heating up. 

14.9. When the 

 indicator stops whirling, you will hear a sound signal informing you that the machine is ready for 

use (has reached the right temperature).