Кофемашина Siemens TK 589NL - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
17
de
en
Using ground espresso/
coffee powder
The appliance must be ready for use.
● Set the desired percup quantity using the
dial
.
● Place the prewarmed cup(s) under the
coffee outlet
10
.
●
Open the cover of the ground coffee duct
15
.
● Add
one to two
level scoops of ground
coffee (grind: mediumfine) to the ground
coffee duct
15
.
Note
Do not add whole beans or instant coffee!
Use a maximum of two level scoops of
coffee.
● Close the cover of the ground coffee duct
15
.
● Press the coffee dispensing button
4
.
i
Repeat the process if a second cup is
desired.
Note:
If coffee is not brewed within 90
seconds, the brewing chamber is emptied
automatically in order to prevent overfilling.
The appliance is rinsed.
Preparing hot water
The appliance must be ready for use. This
function allows water to be heated for a cup
of tea, for example.
!
Risk of burns
Risk of burns
The foaming nozzle 9 gets very hot. Hold it
by the plastic par t only.
Place an appropriate cup under the
foaming nozzle
9
.
Turn the rotary knob
9a
to the centre.
Turn the dial
8
to
g
/
h
.
!
Risk of scalding
Risk of scalding
When the dial is set to
g
/
h
the nozzle
may sputter a little. Do not touch the
foaming nozzle 9 or aim it at anyone.
Water runs into the cup.
End the process by turning the dial
8
back to
●
.
●
●
●
●
●
Important:
It is not possible to dispense hot water
when the appliance is in “
eco
” mode. First
press the
eco
button and then dispense hot
water.
Preparing milk froth
and hot milk
The appliance must be ready for use.
!
Risk of burns
The foaming nozzle 9 gets very hot. Hold it
by the plastic par t only.
Turn the rotary knob
9a
to
W
to foam the
milk or
V
to heat the milk.
Immerse tube
9f
into a container with
enough milk.
Press the
h
button. It will start to flash.
i
The appliance will now heat up for
approx. 20 seconds.
Place an appropriate cup under the
foaming nozzle
9
.
When the
h
button lights up and
J
appears on the display, turn the dial
8
to
g
/
h
.
!
Risk of scalding
When the dial is set to
g
/
h
the nozzle
may sputter a little. Escaping steam is very
hot and may cause liquids to sputter. Do
not touch the foaming nozzle 9 or aim it at
anyone.
The milk is now drawn in and foamed or
heated.
End the process by turning the dial
8
back to O.
Note:
When the foaming nozzle
9
has
cooled down, clean it immediately. Dried
residue is difficult to remove (see section
“Cleaning the foaming nozzle“).
Tip:
If possible, use cold lowfat milk (1.5%
fat).
Milk drinks such as hot chocolate can be
prepared using the
V
setting.
●
●
●
●
●
●
●
