Siemens TK 589NL - Инструкция по эксплуатации - Страница 17

13

de

en

Before using  

for the first time

General

Fill the water tank with fresh, uncarbonated 
water only, and if possible, use only beans 
for fully automatic coffee and espresso 
machines. Do not use coffee beans that 
have been glazed, caramelized or treated 
with other additives containing sugar, since 
they will block the grinding unit. Check the 
water hardness with the enclosed test strip. 
If a value other than 4 is displayed, change 
the setting on the appliance accordingly 
(see “Setting the water hardness”).

Switching on the appliance

● Place the appliance on a flat, water­

resistant surface.

● Pull enough of the power cord out of the 

storage compartment and plug it into the 
electrical socket.

● Remove and rinse the water tank 

13

and fill it with fresh cold water. Do not fill 

above the “max” mark.

● Replace the water tank 

13

 and push it 

firmly downward into place.

● Fill the bean container with coffee beans.

● Make sure that the hot water/steam dial 

8

is at 

●

.

● Set the power on/off switch 

1

 to 

I

.

When switched on for the first time, the 

water pipes in the appliance must be filled.

● Place a cup under the nozzle 

9

.

● Turn the dial 

8

 to 

g

/

h

. Water runs into 

the cup. Turn the dial 

8

 back to 

�

.

● The LED 

eco

 will now flash red. The 

appliance rinses and heats up.

The appliance is 

ready for use

 when all 

four buttons 

4

, 

5

, 

eco

, 

h

 and the coffee 

strength indicator (coffee beans) light up on 
the display. 

This appliance also offers an “

eco

” mode 

which uses less power.
Coffee or steam can be dispensed in the 
usual way when the appliance is in “

eco

” 

mode. When the required button is pressed, 

the appliance first heats up, so it will take a 

little longer until the coffee is brewed or the 
machine is ready to provide steam.

To dispense hot water, first press the 

eco

button. The appliance heats up briefly. Now 

the hot water can be dispensed as usual.

i

 The appliance’s factory settings are 

programmed for optimal performance.

Note:

 If the appliance is being used for the 

first time or has not been operated for a 

prolonged period, the first cup of coffee will 

not have the full aroma and should not be 
consumed.

Controls

1  Power on/off switch

The power switch 

1

 on the rear of the appli­

ance switches the power supply on or off.
When the power on/off switch has been 
turned on, the appliance heats up, rinses 
and is then ready for use.
The appliance does not rinse if it is still 
warm when switched on.

Warning
Do not turn off the power switch while the 
appliance is operating. Before switching off, 
press the eco button to star t the automatic 
rinse cycle. Then switch off at the power 
on/off switch.

  Dial for adjusting the amount of coffee 

per cup

This dial 

 allows variable adjustment of the 

quantity of coffee from a small cup 

E

 to a 

large cup 

F

.