Кофемашина Siemens TK 56004 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
18
en
!
Risk of scalding
Risk of scalding
When the dial
8
is set to
g
/
h
, the nozzle
9
may sputter a little. Escaping steam is
very hot and may cause liquid to sputter.
Do not touch the nozzle
9
or aim it at
anyone.
● End the process by turning the dial
8
back to ““
O
”..
Note:
When the nozzle
9
has cooled down,
clean immediately. Dried residue is difficult
to remove.
Maintenance and daily
cleaning
!
Risk of electric shock
Unplug the appliance before cleaning it.
Never immerse the appliance in water. Do
not use a steam cleaner.
● Wipe the outside of the appliance with a
damp cloth. Do not use scouring agents.
● Always remove any limescale,
coffee, milk or descaling fluid residue
immediately. Such residue can cause
corrosion.
● Wash all removable parts by hand only.
● Rinse out the water tank
1
with water
only.
● Remove, empty and clean the trays for
coffee grounds
0
and residual water
1
.
● Wipe out the inside of the appliance (tray
holders).
N.B.:
If the appliance is cold when switched
on, or if it is switched to “
eco
” mode after
dispensing coffee, it rinses automatically; in
other words the system cleans itself.
Nozzle 9 for hot water/steam
● Unscrew the nozzle
9
from the steam
pipe.
● Dismantle all parts
(Fig. E)
.
● Clean with a caustic cleaning solution and
a soft brush. Clean the tip of the nozzle
9c
with a blunt needle.
● Thoroughly rinse and dry all parts.
Brewing unit
The brewing unit can be removed for
cleaning
(Fig. D)
.
● Press the
eco
button to start the
automatic rinse cycle.
● Turn the power on/off switch
1
to 0.
● Open the door
17
to the brewing unit
18
.
● Hold the red button
18a
down and push
the handle
18b
up until you hear it
engage.
● Grasp the brewing unit
18
by the handle,
remove carefully, and rinse under running
water. Do not use cleaning agents. Do not
place in the dishwasher.
● Vacuum the inside of the appliance, or
clean it with a damp cloth.
● Reinsert the brewing unit
18
all the way
into the appliance.
● Hold the red button
18a
down and push
the handle
18b
down as far as it goes,
until you hear it engage. The brewing unit
is now secure.
● Close the doors of the brewing unit.
Service programme:
Combined cleaning and
descaling process
If an “
S
” is shown on the display while the
appliance is on, the service programme
must be run immediately to clean and
descale the appliance. If the service
programme is not run as instructed, the
appliance may be damaged.
Speciallydeveloped descaling (order no.
310451) and cleaning agents (order no.
310575) are included with the appliance
and can also be obtained from customer
service.
