Kapro 873G - Инструкция по эксплуатации - Страница 12

12

Working in Pulse mode with a detector:

For outdoor work under direct sunlight, or bright conditions and 
for extended indoor ranges up to 60 meters, use the pulse mode 
with a Detector.

When the pulse mode is activated the laser beams will flash at
a very high frequency (Invisible to the human eye) this will allow

the detector to detect the laser beams.
1. The pulse mode can be activated in Automatic and Manual modes. 
2. To switch on the Pulse Mode press the 

P

 button, the green

     LED near the 

P

 push button will light up.

3. When the pulse mode is switched on, the visibility of the laser  
    beams are reduced a little bit.
4. To switch off the Pulse Mode press the 

P

 button again, the    

    green LED near the 

P

 push button will go off.