Kapro 862 - Инструкция по эксплуатации - Страница 11

11

OPERATING INSTRUCTIONS

Working in Manual mode:

In Manual mode the 862’s self-leveling mechanism is 

disabled and the laser lines can be set at any slope required.

1. Long press on the 

V/H

 operation push button (#3) will  

  activate the Manual mode. The laser will project blinking  

  cross lines and the red LED will light up. 

2. Choose the beams that you want to work with by    

  pushing shortly the 

V/H

 operation push button

3. Tilt the laser to the desirable slope.

4. To turn the manual mode

 OFF

, press again the 

V/H 

  operation  push button for 3 sec.

5. While in  Manual mode turning the locking switch #1   

 from 

OFF

 to 

ON 

position will turn off the Manual mode  

  and the red LED near the push button. The automatic  

  self – leveling will be activated if the laser level is within  

  the self – leveling range.