Kapro 862 - Инструкция по эксплуатации - Страница 10

10

OPERATING INSTRUCTIONS

Working in Automatic mode (self-leveling):

In automatic mode the laser level will level itself in the 
range of ± 3° and will project horizontally or vertically or 
both lines simultaneously.
1. Remove the laser from the case and place it on a solid   

  flat Vibration free surface or on a tripod.

2. Push the locking switch #1 forward to the 

ON

 position.  

  The laser level will generate the crossed horizontal and  
  vertical lines and the green LED will light up. 
3. Choose the beams that you want to work with by    
  pushing the

 V/H

 operation push button

4. If the initial slope of the laser is beyond ± 3° the laser  

  lines will flash. In this case reposition the laser on a    

  more leveled surface.
5. Before moving the laser level switch the locking switch  
  #1 backward to the 

OFF

 position, this will lock the     

  pendulum  and protect your laser.