Instrumax SNIPER 50 PLUS - Инструкция по эксплуатации - Страница 10

Measuring conditions

Measuring range: the range is limited to 50 m. At night, at 

dusk and when the target is shadowed the measuring range 

without target plate is increased. Use a target plate to in-

crease the measurement range during daylight or if the target 

has a bad reflection.

Measuring Surfaces

Measuring errors can occur when measuring toward color-

less liquids (e.g. water) or dust free glass, styrofoam or sim-

ilar semi-permeable surfaces. Aiming at high gloss surfaces 

deflects the laser beam and measurement errors can occur. 

Against non-reflective and dark surfaces the measuring time 

can be increased.

Precautions

Please, handle the instrument with care.

Avoid viabrations and hits.

During transportation put the instrument into the soft bag.

Note: the instrument should be dry!

10

Care and cleaning

Do not immerse the instrument in water. Wipe off dirt with a damp, 

soft cloth. Do not use aggressive cleaning agents or solutions.

Specific reasons for erroneous measuring results

- Measurements through glass or plastic windows;

- Dirty laser emitting window;

- After instrument has been dropped or hit. Please check the 

accuracy.

- Large fluctuation of temperature: if instrument will be used 

in cold areas after it has been stored in warm areas (or the 

other way round) please wait some minutes before carrying 

out measurements.

Electromagnetic acceptability (EMC)

It cannot be completely excluded that this instrument will dis-

turb other instruments (e.g. navigation systems);

will be disturbed by other instruments (e.g. intensive electro-

magnetic radiation nearby industrial facilities or radio trans-

mitters).