ADA Cube 360 Professional Edition - Инструкция по эксплуатации - Страница 5

5

TO CHECK PLUMB

Choose a wall and set laser 5 m away from the wall. Hang a plumb with the 
length 2.5 m on the wall. Turn on the line laser  and make the vertical laser 
line meet the point of the plumb. The accuracy of the line is in the range if 
the vertical line doesn’t exceed (up or down) the accuracy that is shown in 

the  specifications  (±3  mm/10  m).  If  the  accuracy  isn’t  corresponding  with 

claimed accuracy, contact the authorized service center.
Note: Because of construction of laser emitter laser beam may be unho-

mogeneous and has different intensity of brightness along the perimeter 
in different light conditions. Unhomogeneous of laser beam: laser patch of 
light but the center of laser beam is identified. Different laser beam bright

-

ness: difference of intensity is up to 50%.

PRODUCT LIFE

Product  life  of  the  tool  is  7  years.  The  battery  and  the  tool  should  never 

be placed in municipal waste.  Date of production, manufacturer’s contact 
information, country of origin are indicated on the product sticker.

CARE AND CLEANING

Please handle line laser  with care. Clean with soft cloth only after any use. 

If necessary damp cloth with some water. If instrument is wet clean and 

dry  it  carefully.  Pack  it  up  only  if  it  is  perfectly  dry.  Transport  in  original 

container/case only.

Note:  During  transport  On/Off  compensator  lock  (5)  must  be  set  to  posi

-

tion “OFF”. Disregard may lead to damage of compensator.

SPECIFIC  REASONS FOR ERRONEOUS MEASURING RESULTS

•   Measurements through glass or plastic windows;
•   Dirty laser emitting window;

•   After line laser has been dropped or hit. Please check the accuracy;
•   Large fluctuation of temperature: if instrument will beused in cold areas

English