ADA ARMO 2D Professional Edition - Инструкция по эксплуатации - Страница 6

6

English

         TO CHECK THE ACCURACY OF LINE LASER (SLOPE MODE)

Set up the instrument between two walls, the distance is 5 m. Turn on the 
line laser and mark the point of cross laser line on the wall. Turn the line 
laser by 180º and mark again the point of cross laser line. Set up the line 
laser 0,5-0,7m away from the wall and make, as described  above, the same 

masrks. If the difference {a1- b2} and {b1-b2} is less then the  value of “ac

-

curacy” (see spesifications), there is no need in calibration.
Example:  when  you  check  the  accuracy  of  Line  Laser  the  difference 
is  {a1-a2}=5  mm  and  {b1-b2}=7  mm.  The  instrument’s  error:  {b1-b2}-
{a1-a2}=7-5=2 mm. Now you can compare this error with standard error.

If the accuracy of line laser isn’t corresponding with claimed accuracy, 
contact the authorized service center. 

         TO CHECK THE ACCURACY OF HORIZONTAL LINE (BENDING 

PLANE)

Choose a wall and set laser 5M away from the wall. Turn on the laser and 
mark the point of  cross laser line. Rotate the line laser to shift the beam 
approximately 2.5m to the left and check that the horizontal line is within 

the  “accuracy”  value  (see  characteristics)  at  the  same  height  as  the  mark 

indicated by the laser cross.  Repeat the same procedure shifting the line 
laser to the right. Note: do not move the rotating axis when checking the 
accuracy. 
  

TO CHECK PLUMB

Choose a wall and set laser 5 m away from the wall. Hang a plumb with the 
length 2.5 m on the wall. Turn on the laser and make the vertical laser line 
meet the point of the plumb. The accuracy of the line is in the range if the 
vertical line doesn’t exceed (up or down) the accuracy that is shown in the 

specifications  (e.g.  ±3  mm/10  m).  If  the  accuracy  isn’t  corresponding  with 

claimed accuracy, contact the authorized service center.

PRODUCT LIFE

Product life of the tool is 7 years. The battery and the tool should never 

3

4