ADA 3D Liner 4V Green - Инструкция по эксплуатации - Страница 7

7

English

the vertical laser line on the wall and measure the distance 3m from point 
B to another point C. Point C must be on the vertical laser line, it means the 
height of C point is 3m.

Measure the distance from point A to point C, if the distance is over 2 mm, 

please, contact with seller to calibrate the laser.

PRODUCT LIFE

Product life of the tool is 7 years. The battery and the tool should never 

be placed in municipal waste.  Date of production, manufacturer’s contact 

information, country of origin are indicated on the product sticker.

CARE AND CLEANING

Please handle line laser  with care. Clean with soft cloth only after any use. 
If necessary damp cloth with some water. If instrument is wet clean and 
dry it carefully. Pack it up only if it is perfectly dry. Transport in original 
container/case only.

Note:  During  transport  On/Off  compensator  lock  (5)  must  be  set  to  posi

-

tion “OFF”. Disregard may lead to damage of compensator.

SPECIFIC  REASONS FOR ERRONEOUS MEASURING RESULTS

•   Measurements through glass or plastic windows;
•   Dirty laser emitting window;
•   After line laser has been dropped or hit. Please check the accuracy;
•   Large fluctuation of temperature: if instrument will beused in cold areas 

after it has been stored in warm areas (or the other way round) please wait 
some minutes before carrying out measurements.