ADA 2D Basic Level - Инструкция по эксплуатации - Страница 7

7

English

 APPLICATION

This line laser generates visible laser beam allowing to make the following 
measurements: Height measurement, calibration of horizontal and vertical 
planes, right angles, vertical position of installations, etc. The line laser is 
used for indoor performance to set zero marks, for marking out of bracing, 
installation of tingles, panel guides, tiling, etc. Laser device is often used 
for marking out in the process of furniture, shelf or mirror installation, etc. 
Laser device may be used for outdoor performance at distance within its 
operation range.

PRODUCT LIFE

Product life of the tool is 7 years. The battery and the tool should never 
be placed in municipal waste.  Date of production, manufacturer’s contact 
information, country of origin are indicated on the product sticker.

CARE AND CLEANING

Please handle line laser  with care. Clean with soft cloth only after any use. 
If necessary damp cloth with some water. If instrument is wet clean and 
dry it carefully. Pack it up only if it is perfectly dry. Transport in original con-

tainer/case only. Note: During transport On/Off compensator lock (5) must 

be set to position “OFF”. Disregard may lead to damage of compensator.

SPECIFIC  REASONS FOR ERRONEOUS MEASURING RESULTS

•   Measurements through glass or plastic windows;
•   Dirty laser emitting window;
•   After line laser has been dropped or hit. Please check the accuracy;

•   Large fluctuation of temperature: if instrument will beused in cold areas 

after it has been stored in warm areas (or the other way round) please wait 
some minutes before carrying out measurements.