ADA 2D Basic Level - Инструкция по эксплуатации - Страница 5

5

English

compensation is also locked.

3. Press V/H button - horizontal beam will turn on. Press the button V/H 
one more time - vertical laser beam will turn on. Again press the button 
V/H - horizontal and vertical beams will turn on.

4. Press the button D of device mode “indoor/outdoor”, indicator will light. 
The device works in “outdoor” mode. Press the button one more time. The 
device will work in “indoor” mode.

5. During battery change, or when the device is on, control lamp may light 
or warning sound may be produced. This indicated for low battery charge. 
Please, change the batteries.

IMPORTANT:

1.  Set the locking grip in position ON: when the instrument is off, the 
compensator will be locked.
2.  Install the device on surface: table, ground, etc.
3.  The self-leveling function won’t work if the surface is angled for more than 
+/-3 degrees. You have to adjust the screws and level the bubble at the center.
4.  Put the instrument on surface and set locking button into ON position. 
Laser beam flashing and sound emission indicate that laser is out of self-
leveling range. Adjust the screws to return the laser into self-leveling range.
5.  Back-lighted bubble level will be on when the instrument is on.
6.  Set the locking button in OFF position, keep the device in transportation 
case.
7.  Line laser may be fixed on the tripod with the help of fixing screw 5/8”.
8.  Before packing the instrument into transportation case, turn it off. 
Otherwise, sound will be produced, laser beam will blink and bubble level 
backlight will turn on.