SVEN GC-W600 - Инструкция по эксплуатации - Страница 7

ENG

7

GC-W600

User Manual

3. Press the desired button again, while the green LED goes out. The button is assigned the default 

value.

To return all pre-programmed buttons, the default values are:

1. Press the “PROG” 

i

 button, the green LED will light up.

2. Press the 

j

 key for 3 seconds until the green LED goes out. All buttons will be assigned default 

values.

Note: when the rudder is turned off from the PC, all settings will return to the default values.

To exit the programming menu (if no button was selected), simply press the “PROG” 

i

 button 

again.

Change of sensitivity of rotation of a rudder.

The steering wheel has three levels of sensitivity: low, medium and high.

The algorithm for changing the sensitivity level is as follows:

1. Press the 

i

 and 

j

  keys  simultaneously  for  3  seconds,  while  the  green  indication  LED 

p

(green LED).

2. Press the 

i

  button,  the  green  LED  flashing  frequency  will  correspond  to  the  set  sensitivity 

level (see Note).

3. Press the 

i

 button again to change the sensitivity level, and the green LED flash frequency 

will correspond to the selected sensitivity level.

4. Press the “UP” button on the D-pad to save the setting.

Note: Each level of sensitivity corresponds to its own flashing frequency of the green LED: at a low 

level, the LED flashes slowly, at medium — it is measured, at high level — quickly.

For use with PS3

1. Connect the steering wheel to the PS3 console and connect the pedals to the handlebar.

2. Turn on the PS3 console.

3. The channel activation indicator will light when the connection is completed automatically.