SVEN GC-W600 - Инструкция по эксплуатации - Страница 6

ENG

6

Game Racing Wheel

•  In  the  “Vibration  Test”  tab,  you  can  check  the  operation 

of both vibrators together by pressing the “Both force” but

-

ton;  or  separately,  by  pressing  the  “Left  force”  and  “Right 

force” buttons (Fig. 11). To stop the test, press the “Stop” but

-

ton. Moving the cursor in the row “Vibration strength” we can 

increase or decrease the force of vibration. To save the set

-

tings, click “Apply” or “OK” in the bottom line of this window.

•  The  “About”  tab  provides  information  about  the  version 

of the installed driver.

Note. Directly in games that support the function “Force 

Feedback”,  you  can  additionally  adjust  the  level  of  feed

-

back  in  different  situations 

—

 in case of an accident, 

an  obstacle  or  road  sign,  etc.  To  do  this,  in  the  settings 

window of a particular game, in contrast to the situations 

(Stick  Volume,  Road  Effects,  Collision,  Engine,  etc.),  you 

need to make the appropriate changes.

Work without pedals

•  The game steering wheel is equipped with jumper switches 

j

, replacing the gas pedal and brak

-

ing: the left switch performs the braking function, the right one — the gas (acceleration).

Programming buttons

The switch buttons, shift lever 

k

 and 

l

 buttons, as well as the gas and toroidal pedals, can 

be assigned the following buttons: 

a

–

h

.The programming algorithm is as follows:

1. Press the “PROG” 

i

 button, the green work indication LED 

p

 (green LED) will light up.

2. Press the programmable button, the green LED will flash.

3. Press the button whose value you want to assign, while the green LED goes out. The program

-

mable button is assigned a new value.

To return to the button the default values are:

1. Press the “PROG” 

i

 button, the green LED will light up.

2. Press the desired button, and the green LED will flash.

Fig. 8

Fig. 9

Fig. 11

Fig. 10