Logitech G923 - Инструкция по эксплуатации - Страница 12

12

 ENGLISH

RESETTING DUAL CLUTCH SYSTEM

Press and hold the left gear shift, right gear shift, and X button 

for two seconds 
The RPM LEDs will all flash four times and then extinguish 

to indicate that the Dual Clutch system has been reset 
The button assigned to the Dual Clutch system (LSB or RSB) 

will revert to its normal function 

USING LOGITECH G HUB

Logitech G HUB enables the following features on the G923:

•  Button programming with profiles that can be linked 

to games 

•  Adjustment of wheel settings, such as Rotation Angle 

and TRUEFORCE strength 

•  Testing of the various buttons, wheel and pedal functions 

G HUB WHEEL SETTINGS

Sensitivity
Alters the output response of the wheel to be more or less 

sensitive  Leaving this slider at 50% will provide a linear 1:1 

output  Between 51% and 100% will make the wheel increasingly 

more sensitive around the centre movement of the wheel  

Between 0% and 49% will make the wheel decreasingly sensitive 

around the centre movement of the Wheel 
Operating Range
The G923 is capable of up to 900 degrees of rotation  Reducing 

this setting will change the point at which the wheel will reach 

full steering lock  This is especially useful if you’re driving a car 

with a smaller actual steering lock angle, such as a Formula 1 

or GT3 car 
Centering Spring (for games without force feedback)
Most games that support force feedback already model 

the correct return to center function of the G923 based on the 

virtual car  It is recommended that the Centering Spring option 

be turned off for these games 
Enabling the Centering Spring option will allow you to override 

the game features and adjust the strength of the return 

to center force using the provided slider 
Torque
Only available for TRUEFORCE supported games  Torque controls 

the overall force feedback strength for your G923