Logitech G923 - Инструкция по эксплуатации - Страница 11

11

 ENGLISH

2 

Press the button you want to set as the dual clutch button  

The only valid buttons for this are the left stick button (LSB) 

and right stick button (RSB)  The RPM LEDs will flash red 

to show that you’re in clutch position setting mode 

3 

While in your chosen simulation or game with the car still on 

a track, fully depress the clutch and gas pedals  Engage first 

gear and keep pressing the minus button down until the car 

begins to move in-game  You can adjust the precise bite 

point of the clutch by using the plus and minus buttons until 

you are happy with the setting 

4 

At this point you may test the dual clutch without 

leaving the setting mode  It is recommended you attempt 

a race start, stop the car and adjust the bite point and 

then try again until you are satisfied with the performance 

of the dual clutch 

5 

Press the Select button in the middle of the dial on the wheel 

to exit dual clutch setting mode  The RPM LEDs will flash 

in a sequence from green to blue to show that the setting 

is saved  The RPM LEDs will then go out and begin responding 

again to RPM output from supported games