Smeg FAB32LON1 - Инструкция по эксплуатации - Страница 10

Use

34

4. Use the corresponding temperature 

buttons 

 to set the temperatures of the 

fridge and freezer. The desired 
temperature will flash on the display.

5. After approximately 5 seconds of button 

inactivity, the actual temperature of the 
compartment will be displayed.

Alarm

The alarm sounds to warn of the following:

The fridge door has been open for more 
than a minute

 (continuous buzzer with 

relative red light on)

•  Press the alarm button 

 or close the 

fridge door to deactivate the buzzer and 
switch off the red light.

The temperature inside the refrigerator 
or freezer compartment is too high 

(intermittent buzzer, flashing display and 
light on)

•  Press the alarm button 

 to deactivate 

the buzzer.

•  The red light and the flashing 

temperature on the display turn off 
automatically when the refrigerator 
compartment or the freezer compartment 
reach the previously set temperature.

•  If the freezer compartment does not 

reach the required temperature within 24 
hours of the alarm being turned off, it will 
sound again.

Control lock

1. Press the alarm button 

 for 3 

seconds to turn on the control lock. The 

 and 

 symbols flash for 3 

seconds.

2. Press the alarm button 

 again for 3 

seconds to turn it off.

The other buttons are disabled 
when setting.

When the appliance is first turned 
on, the alarm will not sound for the 
first 24 hours to allow the 
appliance to reach the set 
temperatures. 

The control lock is a device that 
protects the appliance from 
accidental or inappropriate use.

When the control lock is active, 
only the alarm button 

 is 

active. Pressing any other button 
makes the 

 and 

 symbols 

appear on the displays for 3 
seconds.