Samsung RB37A5290SA - Инструкция по эксплуатации - Страница 43

43

4. TROUBLESHOOTING

2) Test mode Description - Twin

1. Forced Operation Function 1

1-1)  When any button is pressed once during the Test Mode, it will 

enter the Forced Operation. 
When it starts the Forced Operation, the LED Lamps indicating the 
Fridge Temperatures (1℃, 2℃, 3℃, 5℃, 7℃) and the Freezer 
Temperatures (-23℃,-21℃,-19℃, -17℃,-15℃) will be on showing 
that it is on the Forced Operation. 
At this time, it starts alarming with “Beep” sounds.

1-2)  When the Forced Operation is selected, the compressor starts 

without a 10-minute delay in any operation mode. 
At this time, when it is in a Defrost mode, it stops defrosting and 
the Forced Operation begins. (If the Forced Operation begins as 
soon as the compressor stops, it may cause the overload. 
So, take care when entering into the Forced Operation.)

1-3)  When the Forced Operation is selected, the compressor and the F-Fan operate for 24 hours without 

stopping.

1-4)  When the unit is shifted to the Forced Operation, the Freezer and the Fridge temperatures will be 

automatically set to -23℃ and 1℃ respectively.

1-5)  When the Forced Operation is selected, the Power Freeze function won't work. 

(All the buttons will operate normally.) And, when the Power Freeze function is selected, the Power 
Freeze LED will go off in 10 seconds.

1-6)  When the Forced Defrost or Test Cancellation Mode is selected within a minute with the Forced 

Operation being selected, the set temperature will be changed to the previously set operating 
temperature.

1-7)  The alarm sound during the Forced Operation keeps on until the Forced Operation completes and 

there is no cancellation function.

2. Forced Operation Function 2

1-1)  When it is on the Forced Operation 1 during the Test Mode, press 

any button once. Then, Forced Operation 1 will stop immediately 
and it will go into the Forced Operation 2. when it enters the 
Forced Operation 2, it indicates that it is on the Forced Operation 
2 mode by turning on “7℃”, “5℃”, and “3℃” temperature LEDs 
on the Fridge Display Panel and “-15℃”, “-17℃” and “-19℃” 
temperature LEDs on the Freezer Display Panel

1-2)  When the Forced Operation is selected, the compressor starts 

without a 10-minute delay in any operation mode. 
At this time, when it is in a Defrost mode, it stops defrosting and 
the Forced Operation begins. (If the Forced Operation begins as 
soon as the compressor stops, it may cause the overload. 
So, take care when entering into the Forced Operation.)

1-3)  When the Forced Operation 2 is selected, the compressor and the F-Fan operate for 24 hours 

without Stopping and R Valve is closed and R-Fan stop for 24 hours 

1-4)  When the unit is shifted to the Forced Operation, the Freezer and the Fridge temperatures will be 

automatically set to -23℃ and 1℃ respectively.

1-5)  When the Forced Operation is selected, the Power Freeze function won't work. 

(All the buttons will operate normally.) And, when the Power Freeze function is selected, the Power 
Freeze LED will go off in 10 seconds.

1-6)  When the Forced Defrost or Test Cancellation Mode is selected within a minute with the Forced 

Operation being selected, the set temperature will be changed to the previously set operating 
temperature.

1-7)  The alarm sound during the Forced Operation keeps on until the Forced Operation completes and 

there is no cancellation function.