Холодильник Miele KFN 29032 D ws - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Temperature and door alarm
31
The appliance has a warning system
which ensures that the temperature in
the freezer cannot rise unnoticed and to
avoid energy being wasted if a door is
left open.
Temperature alarm
If the temperature in the freezer
remains above -18 °C for a long
time, check that the frozen food has
not started to defrost.
If it has, check that the food is safe
to use and if it is, then use it as soon
as possible or cook it before freezing
it again.
If the temperature in the freezer section
becomes too warm
will light up red
in the temperature display for the
freezer section.
An alarm will also sound until the cause
of the alarm is rectified or the alarm is
switched off.
The temperature the appliance is set at
determines the temperature the appli-
ance recognises as being too warm.
The temperature alarm is only dis-
played in the start screen and not
when selecting a setting.
A temperature alarm is displayed be-
fore an existing door alarm.
The temperature alarm occurs, e.g.
– when the appliance is switched on
and the temperature in the freezer
section differs greatly from the set
temperature,
– if a lot of room air enters the freezer
when food is being loaded, re-ar-
ranged or taken out,
– when freezing large amounts of food
at once,
– in the event of a power cut,
– if the appliance has a fault.
The alarm will stop and
will go out
as soon as the temperature has
dropped down to the correct level
again.
Switching the temperature alarm off
early and checking the warmest tem-
perature
If the alarm disturbs you, you can
switch it off early. You can also find out
what the warmest temperature was in
the freezer section.
Touch
.
The fault message is confirmed and the
alarm will stop. The start screen ap-
pears in the display: the warmest tem-
perature recorded in the freezer section
so far will flash in the temperature dis-
play for approx. 1 minute. The temper-
ature display will then change to show
the current temperature in the freezer
section.
You can exit from the flashing temperat-
ure display early:
Touch the temperature display for the
freezer section.
The flashing warmest temperature dis-
play will go out. The display will then re-
vert to showing the current temperature
in the freezer section.
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
