Liebherr KX 1021 Comfort - Инструкция по эксплуатации - Страница 5

Malfunctions

Your appliance is designed and manufactured for a lengthy, 

reliable operating life with no malfunctions. If a malfunction 

nonetheless occurs during operation, check whether it is due 

to an operating error. Please note that even during the warranty 

period the resultant servicing costs in this case will have to be 

borne by the owner.
You may be able to rectify the following faults by checking 

the possible causes yourself:
• 

Appliance does not function: 

-  Is the plug correctly fitted in the mains socket?

-  Is the socket fuse intact?

• 

Loud running noise:

-  Is the appliance set up firmly on the floor?

-  Does the appliance cause nearby items of furniture or objects 

to vibrate? Please note that noises caused by the refrigerant 

circuit cannot be avoided.

• 

The temperature is not low enough:

-  Is the temperature setting correct (see "Setting the tempera-

ture")?

-  Have excessive amounts of fresh food been placed in the 

appliance? 

-  Does the separately installed thermometer show the correct 

reading?

-  Is the ventilation system working properly?

-  Is the appliance set up too close to a heat source?
If none of the above causes apply and you cannot rectify the 

fault yourself, contact the nearest 

customer service 
department .

Please state the 

appliance designation

➊

, 

service number

➋

,

appliance number

➌

of the rating plate (see fig.). The type 

plate is located in the refrigerator 

compartment on the left-hand side 

next to the vegetable bins.

Shutting your appliance down

If your appliance is to be shut down for any length of time, 

switch it off and disconnect the plug or remove the fuse. Clean 

the appliance and leave the door open in order to prevent 

unpleasant smells. 

The refrigerant circuit has been tested for leaks. 

The appliance complies with current safety regulations and 

EC directives 2006/95/EC and 2004/108/EC.

All types and models are subject to continuous improvement 

and the manufacturer therefore reserves the right to make 

modifications to the shape, equipment and technology.

Changing over door hinges

Fig. 

T: You can change over the door hinges if necessary.

Follow the order of the positions illustrated in fig. 

T.