Liebherr IG 1156 Premium SuperFrost - Инструкция по эксплуатации - Страница 7

6 Maintenance

6.1 Manual defrosting

After a long period of operation, a layer of frost or ice can build

up inside the appliance.
The  layer  of  frost  or  ice  builds  up  faster  if  the  appliance  is

opened  often  or  if  the  food  is  warm  when  placed  inside.

However,  a  thick  layer  of  ice  will  increase  the  appliance‘s

energy  consumption.  You  should  therefore  defrost  the  appli-

ance regularly.

CAUTION

Risk of injury and damage as a result of hot steam!

u

Do not use electric heaters or steam cleaners, naked flames

or defrosting sprays for defrosting.

u

Do not remove ice using sharp instruments.

u

Switch on SuperFrost one day before defrosting.

w

The frozen goods are provided with a "cold reserve".

u

Switch off the appliance.

w

The temperature display goes out.

w

If  the  temperature  display  does  not  go  out,  the  child  lock

function (see 5.2) is active.

u

Pull out the power plug or switch off the fuse.

u

Place cold storage accumulators on top of the frozen food.

u

If  possible,  put  the  frozen  goods  in  the  freezer  drawer,

wrapped  in  newspaper  or  a  blanket,  and  store  in  a  cool

place.

u

Place  a  pan  with  hot,  not  boiling

water on a middle shelf.

w

Defrosting is speeded up.

w

Defrost water is collected in the drawers.

u

Leave the door of the appliance open while defrosting.

u

Remove detached pieces of ice.

u

Pay  attention  that  the  defrost  water  does  not  run  into  the

kitchen unit.

u

If  necessary,  pick  up  defrost  water  several  times,  using  a

sponge or cloth.

u

Clean the appliance (see 6.2) and rub dry.

6.2 Cleaning the appliance

Before cleaning:

CAUTION

Risk of injury and damage as a result of hot steam!

Hot steam may damage the surfaces and cause burns.

u

Do not use any steam cleaners!

NOTICE

Incorrect cleaning damages the appliance!

u

Do not use cleaning agents in concentrated form.

u

Do not use any scouring or abrasive sponges or steel wool.

u

Do  not  use  any  cleaning  agents  containing  sand,  chloride,

chemicals or acid.

u

Do not use chemical solvents.

u

Do not damage or remove the type plate on the inside of the

appliance. It is important for the customer service.

u

Do  not  pull  off,  bend  or  damage  cables  or  other  compo-

nents.

u

Do  not  allow  any  cleaning  water  to  enter  the  drain  channel,

ventilation grille or electrical parts.

u

Empty the appliance.

u

Pull out the plug.

- Use  soft  cleaning  cloths  and  a  multi-purpose

cleaning agent with neutral pH value.

- Only  use  food  compatible  cleaning  and  care

agents on the inside of the appliance.

Interior:

u

Clean  the  plastic  surfaces,  outside  and  inside,  by  hand

using lukewarm water and a little washing-up liquid.

Items of equipment:

u

Clean items of equipment by hand with lukewarm water and

a little washing-up liquid.

After cleaning:

u

Wipe dry the appliance and items of equipment.

u

Connect the appliance and switch it on again.

u

Switch on SuperFrost (see 5.8) .

When the temperature is sufficiently cold:

u

Put the food back inside.

6.3 Customer service

First  check  whether  you  can  correct  the  fault  yourself  by  refer-

ence to the list (see Malfunction). If this is not the case, please

contact  the  customer  service  whose  address  is  given  in  the

enclosed customer service list.

WARNING

Risk of injury if repair work is not carried out professionally!

u

Have  any  repairs  and  action  -  not  expressly  specified  -  on

the  appliance  and  mains  cable  carried  out  by  service

personnel only. (see Maintenance)

u

Read  the  appliance

designation

Fig.  4  (1),  service

No.

  Fig.  4  (2)  and

serial  No.

  Fig.  4  (3)

off  the  type  plate

located  inside  the

appliance on the left-

hand side.

Fig. 4 

u

Notify  the  customer  service,  specifying  the  fault,  appliance

designation

  Fig.  4  (1),  service  No.  Fig.  4  (2)  and  serial  No.

Fig. 4 (3).

w

This will help us to provide you with a faster and more accu-

rate service.

u

Keep  the  appliance  closed  until  the  customer  service

arrives.

w

The food will stay cool longer.

u

Pull out the mains plug (not by pulling the connecting cable)

or switch off the fuse.

7 Malfunction

Your  appliance  is  designed  and  manufactured  for  a  long  life

span  and  reliable  operation.  If  a  malfunction  nonetheless

occurs  during  operation,  check  whether  it  is  due  to  a  handling

error.  In  this  case  you  will  have  to  be  charged  for  the  costs

incurred,  even  during  the  warranty  period.  You  may  be  able  to

rectify the following faults yourself:
Appliance does not work.

→

The appliance is not switched on.

u

Switch on the appliance.

→

The power plug is not properly inserted in the wall socket.

u

Check power plug.

Maintenance

7