Liebherr CUPsl 2721 Comfort - Инструкция по эксплуатации - Страница 7

13

Do not install the appliance side-by-side with another refrigera-

tor or freezer. This is important to prevent condensation and 

consequential damage from it.

The 

external dimensions

 of the appliance can be seen on the 

illustration at the back (fig.

 S

).

Instructions for installation and modification

All types and models are subject to continuous improvement 

and the manufacturer therefore reserves the right to make 

modifications in the shape, equipment and technology.

Changing over door hinges

Fig. 

T:

 You can change over the door hinges if necessary.

Follow the order of the positions illustrated in fig. 

T/T1

.

Insertion into row of kitchen units

Fig. 

U:

 The appliances can be installed in a row of kitchen units. 

To adapt the height of the appliance to the surrounding furniture 

a top unit 

1

 can be added.

A gap of at least 50 mm depth must be provided behind and 

along the entire width of this unit so as to ensure sufficient ven-

tilation. The area of ventilation underneath the ceiling should be 

at least 300 cm

2

. The greater the area the more economically 

the appliance will run.

W

  When setting up the appliance next to a wall 

4

, a minimum 

distance of 30 mm must be provided on the hinge side be-

tween the appliance and the wall.

1

 top unit                  

2

 refrigerator/freezer

3

 kitchen unit side panel     

4

 wall

Before reading, please fold out and refer to 

the illustrated back page.