Liebherr CTesf 2841 Comfort - Инструкция по эксплуатации - Страница 7

13

Do not install the appliance side-by-side with another refrig-

erator or freezer. This is important to prevent condensation 

and consequential damage from it.

The 

external dimensions

 of the appliance can be seen on 

the illustration at the back (fig.

 S

).

Model 

       Appliance dimensions (mm) 

Nominal width  

A

C

D

E

G

H

CT 2011

550 560 1127 62 615 1230

CT(esf)2041 550 560 1127 62 615 1230
CT 2411

550 560 1127 62 615 1425

CT(esf)2431 550 560 1127 62 615 1425
CT 231

550 560 1127 62 615 1570

7 Instructions for installation 

and modification

All types and models are subject to continuous improvement 

and the manufacturer therefore reserves the right to make 

modifications in the shape, equipment and technology.

Changing over door hinges

Fig. 

T/T1/T2:

 You can change over the door hinges if neces-

sary.

Follow the order of the positions illustrated in fig. 

T 

or 

T1/T2

.

Insertion into row of kitchen units

Fig. 

U:

 The appliances can be installed in a row of kitchen 

units. To adapt the height of the appliance to the surrounding 

furniture a top unit 

1

 can be added.

A gap of at least 50 mm depth must be provided behind and 

along the entire width of this unit so as to ensure sufficient 

ventilation. The area of ventilation underneath the ceiling 

should be at least 300 cm

2

. The greater the area the more 

economically the appliance will run.

W

  When setting up the appliance next to a wall 

4

, a mini-

mum distance of 30 mm must be provided on the hinge 

side between the appliance and the wall.

1

 top unit                

2

 refrigerator/freezer

3

kitchen unit side panel 

4

wall

Before reading, please fold out and refer 

to the illustrated back page.