Kuppersberg VBMR 134 - Инструкция по эксплуатации - Страница 25

25

ENGLISH

TECHNICAL PASSPORT

Built under larder

PA RT 5. T RA N S P O RTAT I O N 

A N D C H A N G I N G O F 

I N S TA L L AT I O N P O S I T I O N

Transportation  and  changing  of 

Installation position

Â

The original packages and foamed 

polystyrene (PS) can be retained if required.

Â

During transportation, the appliance 

should be secured with a wide string or a 

strong rope. The instructions written on 

the corrugated box must be followed while 

transporting.

Â

Before transporting or changing the 

installation position, all the moving objects 

(ie,shelves,crisper…) should be taken out or 

fixed  with  bands  in  order  to  prevent  them 

from getting damaged.

Carry your fridge in the upright position.

PA RT 6. B E F O R E CA L L I N G 

YO U R A F T E R S A L E S 

S E RV I C E

If your fridge is not working properly, it 

may be a minor problem, therefore check the 

following.

The appliance does not operate,

Check if:

Â

There is a power failure.

Â

The mains plug is not plugged in 

properly, or is loose.

Â

The thermostat setting is on posi-

tion “ “.

Â

The socket is defective. To check this, 

plug in another appliance that you know is 

working into the same socket.

The appliance performs poorly,

Check if:

Â

You have overloaded the appliance.

Â

The door is not closed properly.

Â

There are not enough ventilation 

ducts in the kitchen unit as mentioned in 

the installation manual.

If there is noise:

The cooling gas which circulates in the 

fridge circuit may make a slight noise (bub-

bling sound) even when the compressor is 

not running. Do not worry, this is quite nor-

mal. If you hear different sounds, check if:

Â

The  appliance  is  installed  firmly  as 

described in the installation manual.

Â

Objects on the appliance are vibrat-

ing.

If there is water in the lower part of the 

fridge,

Check if:

The drain hole for water is not clogged 

(use defrost drain plug to clean the drain 

hole).)

If  your  fridge  is  not  cooling  sufficiently 

enough;

Your fridge is designed to operate in 

the ambient temperature intervals stated 

in the standards, according to the climate 

class stated in the information label. We do 

not recommend operating your fridge out of 

stated temperatures value limits. This will 

reduce the cooling efficiency of the fridge.

This appliance is designed for use at an 

ambient temperature within the 10°C - 32°C 

range.

Recommendations

Â

When there is no power, to prevent 

any damage to the compressor, you should 

unplug the refrigerator. You should delay 

Climate 

Class

Ambient Temperature °C

T

Between  16 and  43 (°C)

ST

Between  16 and  38 (°C)

N

Between  16 and  32 (°C)

SN

Between  10 and  32 (°C)