Kuppersberg NFML 181 WG - Инструкция по эксплуатации - Страница 42

42

TECHNICAL PASSPORT

ENGLISH

Refrigerator

eliminate bacteria, creating a cleaner 

cooling space.

2) Enabling the LECO function 

manually

Press the Function key to select 

LECO until the icon of LECO gets 

flickering,  and  then  press  the  OK/Lock 

key for confirmation. If the OK/Lock key 

is not pressed within 5s, the current 

setting will be invalidated.

3) Exiting of the LECO function

Â

The LECO function gets exited 

automatically 20 minutes after it is 

enabled.

Â

Disabling the LECO function 

manually: Press the Function key to 

select LECO until the corresponding 

icon  gets  flickering,  and  then  press  the 

OK/Lock key to validate the setting.

1.3. Fast Freezing

1) When the Fast Freezing function 

is enabled, the freezer temperature will 

be controlled at -32

0

С  automatically, 

and after 26 hours of running, the Fast 

Freezing function gets exited. Cooling 

down the freezer temperature in a rapid 

manner  is  beneficial  to  the  prevention 

of food nutrition against lost and the 

preservation of freshness.

Under the Fast-Freezing mode, the 

freezer temperature is subjected to no 

adjustment.

2) Enabling the Fast-Freezing 

function

Press the Function key to select Fast 

Freeze until the corresponding icon 

gets  flickering,  and  then  press  the  OK/

Lock  key  within  5s  for  confirmation.  If 

1.Functions

1.1. Temp. setting

1) Fridge temperature setting

Press the Temp. Zone key to select 

the fridge zone, with the corresponding 

icon flickering, and then press the Temp. 

key  to  adjust  the  temperature,  finally 

press the OK/Lock or wait for 5s to 

validate the above temperature setting.

The fridge temperature setting 

cycles as following:

5

→

6

→

7

→

8

→

OF

→

2

→

3

→

4

→

5;

OF refers to Fridge Off, and when OF 

takes effect, the fridge will stop cooling.

Take foods out of the fridge 

compartment before setting this 

function.

2) Freezer temperature setting

Press the Temp. Zone key to select 

the freezer zone, with the corresponding 

icon flickering, and then press the Temp. 

key  to  adjust  the  temperature,  finally 

press the OK/Lock or wait for 5s to 

validate the above temperature setting.

The freezer temperature setting 

cycles as following:

→

1 8

→

- 1 7

→

- 1 6

→

- 2 4

→

- 2 3

→ 

-22

→

-21

→

-20

→

-19

→

-18;

1.2. LECO

1) When the refrigerator is powered 

on,  the  LECO  net  flavor  function  will 

run automatically on a regular basis, 

lasting for 20 minutes each time; the 

LECO system decomposes odors and 

microorganisms into CO2 and H2O. 

At the same time, the LECO system 

releases free radicals to actively