Kraft KF-NF720XD - Инструкция по эксплуатации - Страница 12

22

23

ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ • USER GUIDE

ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ • USER GUIDE

ХОЛОДИЛЬНИК  

 REFRIGERATOR-FREEZER

ХОЛОДИЛЬНИК  

 REFRIGERATOR-FREEZER

power cord is damaged, have it replaced by an authorized service center.

•  This refrigerator should be properly grounded for your safety. The power cord of this 

refrigerator  is  equipped  with  a  three-prong  plug  which  mates  with  standard  three 
prong wall outlets to minimize the possibility of electrical shock.

•  Do  not,  under  any  circumstances,  cut  or  remove  the  third  ground  prong  from  the 

power cord supplied.

•  This  refrigerator  requires  a  standard  220-240  V  A.C.  ~/50  Hz  electrical  outlet  with 

three-prong ground.

•  This refrigerator is not designed to be used with an inverter.
•  The cord should be secured behind the refrigerator and not left exposed or dangling 

to prevent accidental injury.

•  Never unplug the refrigerator by pulling the power cord.  Always grip the plug firmly 

and pull straight out from the receptacle.

•  Do not use an extension cord with this appliance. If the power cord is too short, have 

a qualified electrician or service technician install an outlet near the appliance. Use of 
an extension cord can negatively affect the performance of the unit.

 Before Plugging in! 

You must check that you have a socket which is 

compatible with the plug supplied with the unit.

 Before switching on! 

Do not turn on until two hours after moving the unit. 

 DO NOT SWITCH ON 

UNTIL FOUR HOURS AFTER MOVING THE FRIDGE/

FREEZER. The coolant fluid needs time to settle. If the appliance is switched off 
at any time, wait 30 minutes before switching back on to allow the coolant fluid 
to settle.

Interior Accessories

Various glass or plastic storage shelves are included with your appliance — different 

models have different combinations.

You should always slide one of the full size glass storage shelves into the lowest set 

of  guides,  above  the  fruit  and  vegetable  containers,  and  keep  it  in  this  position.  To  do 
this,  pull  the  storage  shelf  forward  until  it  can  be  swiveled  upwards  or  downwards  and 
removed.

 Note: 

Please do the same in reverse to insert the shelf at a different height.

In order to make the most of the volume of the fresh food storage compartment and 

frozen-food storage compartment, the user can remove one or more shelves, drawers, 
out of the appliance, according to your daily use.

START

Control system schemes

1. 

Clean the parts of the refrigerator with lukewarm water containing a littleneutral 

detergent and with clear water, and wipe them dry.

Notes

: Electric parts of the refrigerator can only be wiped by dry cloth.

2.Turn on electricity. The compressor begin to work.

3.Open  the  door  30  minutes  later,  if  the  temperature  in  the  refrigerator  decreased 

obviously, it shows that the refrigerator system works well. When the refrigerator operates 
for  a  period  of  time,  the  temperature  controller  will  automatically  set  the  temperature 
within limits it opens.

The display is located in the middle of the refrigerator door. Please refer to the below 

figure for the layout.

Intelligence 

Under intelligence, it is 4

°C

 in the refrigerator and -18

°C

 in the freezer.

Temperatures cannot be changed and you can click the temperature zone button to 

check the temperature.

1) To enter intelligence
Click “option” until it flickers and then click “OK” to enter this function.
2) To quit intelligence
Under  intelligence,  click  “option”  until  it  goes  to  intelligence,  click  “OK”  to  quit  this 

function and the light goes off.

OFF

Fast

Fast

Cooling

Freezing

Smart ECO

Vacation

Fridge

Freezer

Function

OK

introduction of the buttons:
Fridge: to set the refrigerator temperature;
Freezer: to set the freezer temperature;
Function: to choose functions of fast cooling, fast freezing, intelligence 

and vacation;  

OK: to enter or to quit the existing function function setting.

Appliance connected to power at the first time

When  the  appliance  is  connected  to  power  at  the  first  time,  the 

display  will  be  lit  for  2  seconds  beforegoing  normal  and  the  appliance 
runs with intelligence function.

Display control 

When the refrigerator door is closedand there is no button operation 

in 3 minutes, the display light goes off.

When  the  display  light  is  off,  open  the  refrigerator  door  or  click  any 

button to light it up.

Temperature setting

1) 

Click  the  “refrigerator”  or  “freezer”  button  and  when  it  flickers 

in  the  symbol,  temperatures  can  be  set;  each  time  when  the  button  is 
clicked,  the  temperature  changes  accordingly  (the  display  shows  the 
temperature  accordingly).  Temperatures  cannot  be  set  under  functions 
of fast cooling, fast freezing, intelligence and vacation.

2) Under temperature setting, if there is no button operation in 5 seconds, the button 

stops flickering and the set temperature comes into effect.

3)Temperature cycle 
Refrigerator: 2

°C

→

3

°C

→

4

°C

→

5

°C

→

6

°C

→

7

°C

→

8

°C

→

OFF

→

2

°C

Freezer: -24

°C

→

-23

°C

→

-22

°C

→

-21

°C

→

-20

°C

→

-19

°C

→

-18

°C

→

-17

°C

→

-16

°C

→

-24

°C