Jacky`s JR BW1770 - Инструкция по эксплуатации - Страница 23

EN - 23 -

If your fridge freezer is not working properly, it may be a minor problem, therefore check the 

following, before calling an electrician to save time and money. 

What to do if your appliance does not operate; 

Check that;

• 

There is no power, 

• 

The general switch in your home is disconnected ,

• The socket is not sufficient. To check this, plug in another appliance that you know which 

is working into the same socket.

What to do if your appliance performs poorly;

Check that;

• You have not overloaded the appliance ,
• 

The fridge temperature set to MAX.

• 

The door is closed perfectly ,

ERROR TYPE

MEANING

WHY

WHAT TO DO

E10

"Refrigerator comp. 

Not Cold enough"

Ideal temperature for 

Ref. Compartment is 

+4 

o

C. If you see this 

warning your foods 

have risk of spoiling.

This warning becomes 

visible if electricity 

is off for a long time 

(most probably) or the 

refrigerator is activated 

for the first time or hot 

food is loaded to the 

appliance.

1. Set the refrigerator 

temperature to colder values 

or set the super cooling 

mode until the compartment 

gets to normal temperature.
2. Do not open the door 

much until this failure is off.
3. Please empty the location 

at the front area of air duct 

channel holes.
4. Please be careful while 

loading the appliance in order 

not to avoid the ventilation 

at the areas which are very 

close to the sensor.
5. Please don’t open the 

refrigerator doors frequently 

until the warning disappears.
6. If the warning continues, 

please contact with 

authorized technical service.

E11

Refrigerator comp. 

too Cold

The foods starts to 

freeze because of 

the too much cold 

temperature.

This warning means 

that the temperature of 

the cooler compartment 

is very low. Therefore, 

this ambient condition 

may lead to the 

freezing of foods in the 

compartment.

1. Check if the “Super cooling 

mode” is on.
2. Decrease the refrigerator 

temperature values.
3. 

If the warning continues, 

please contact with 

authorized technical service.