Холодильник Fulgor Milano FBRD 401 FED - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
1182
20
Using the appliance
EN
N.B.: The freezer and refrigerator temperature
is also depending on how often the refrigerator and
freezer doors are opened and the quantity of food
contained inside the product.
With room temperatures between 20 °C and 25 °C,
we suggest setting the refrigerator temperature at
+5 °C and the freezer temperature at -18 °C.
ATTENTION! If the appliance is switched on
immediately after it has been switched off, the
compressor will start after 10 minutes. This is part
of the appliance normal operation.
SETTING THE TEMPERATURE IN THE
FREEZER COMPARTMENT
The appliance has a standard setting suitable for normal
mode operation.
The display “
8
” shows the actual temperature in the freezer
compartment, which can be between +20 °C and -40 °C; if
temperatures higher than +20°C are detected, the freezer
display will show the “
H
” symbol.
The temperature in the freezer compartment is set by
pressing the
7 Up/Down
symbols,
Up
for higher values
and
Down
for lower values, and it is possible to set values
between -14 °C and -24 °C.
Upon starting the appliance, the display shows the actual
temperature; it varies one degree at a time whenever the
7 Up/Down
symbols are pressed; during temperature
setting, the displayed value flashes; about 6 seconds after
the last symbol has been pressed, the actual temperature
is displayed. The temperature slowly reaches the set value.
SETTING THE TEMPERATURE IN THE
REFRIGERATOR COMPARTMENT
The appliance has a standard setting suitable for normal
mode operation.
The display “
3
” shows the actual temperature in the refrig-
erator compartment, which can be between 0 °C and 19 °C;
if temperatures higher than 19°C are detected, the display
will show the “
H
” symbol.
The temperature in the refrigerator compartment is set by
pressing the
2 Up/Down
symbols,
Up
for higher values
and
Down
for lower values, and it is possible to set values
between 2 °C and 8 °C.
Upon starting the appliance, the display shows the actual
temperature; it varies one degree at a time whenever the
2 Up/Down
symbols are pressed; during temperature
setting, the displayed value flashes; about 6 seconds after
the last button has been pressed, the actual temperature
is displayed. The temperature slowly reaches the set value.
CHECKING THE PROGRAMMED TEM-
PERATURE
If the symbol
2
(refrigerator area) and the symbol
7
(freezer
area) are touched once, the programmed temperature will
flash on the display for 6 seconds; after, the actual tem-
perature inside the compartments will be displayed. The set
functions remain stored in the memory of the appliance,
even in the event of a power cut or when the appliance is
disconnected from the electricity supply; upon start-up,
the last temperature setting for both compartments will
flash on the display.
2
3
7
8
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
