Fhiaba UC2D90P - Инструкция по эксплуатации - Страница 73

73

www.fhiaba.com · info@fhiaba.com · Info Line +39 0434 420162

EN

16. CARE AND CLEANING

16.1 Care and Cleaning

To clean the parts made of steel use a microfiber 
cloth and the sponge provided in the kit with the 
appliance. Always use the cloth and sponge in the 
direction of the steel’s satin finish.

> 

Every now and then, to polish the steel, wipe 

with a slightly damp microfiber cloth.

> 

Do not use the sponge on aluminium parts, 

such as the handles and the profiles of the glass 
shelves. 

> 

You should use special care to keep the venti-

lation openings in the appliance or in the cabinet 
that houses it, free of obstructions.

Note

Scrupulously follow the detailed directions 
that can be found in the provided kit and 
never use abrasive or metallic products 
which could scratch and damage the satin 
finishing on the appliance permanently.

16.2 Condenser cleaning

A ventilation grille is located at the bottom.
To clean it use a vacuum cleaner with a soft 
brush attachment at maximum power, sweeping 
it along the vent slits. In case of a significant dust 
build up, the ventilation grille can be removed to 
allow a more accurate cleaning of the filter.

16.3 Internal cleaning

> 

Clean the internal and removable parts by wa-

shing them with a solution of lukewarm water 
with a small amount of dishwashing detergent.

> 

Rinse and dry right away.

> 

Do not use mechanical devices or other me-

thods to speed up defrosting.

Note

Do not bring cold glass parts into contact 
with boiling water. 
Do not wash any parts of the refrigerator 
in a dishwashing machine since this could 
damage or irreparably deform the parts.

Warning

Do not use water on the electrical parts, 
lights and control panel.