Fhiaba UC2D90P - Инструкция по эксплуатации - Страница 41

41

www.fhiaba.com · info@fhiaba.com · Info Line +39 0434 420162

EN

2.1 Installation

Make  sure  that  installation  is  performed  correctly, 
adhering to all directions in the specific installation 
manual provided with the appliance.

Attention

Do not use extension cords and/or 
multiple adapters for the power supply 
connection. 

2.2 Connection to the water system 

(if present)

Models containing an Ice Maker require a connec-
tion to a potable water supply system. This can 
be executed through a 1/4” water line (copper or 
polyethylene) from the house water supply.
The system pressure must be between from 8 psi 
to 75 psi (between 0.5 bar and 5 bar).
Pressures outside of those specified can cause 
malfunctions or leaks in the water system.

Symbols used in the Manual:

Note

tips for correct use of the appliance

Important  

Warnings to prevent damage to the 
device

Attention

Warnings to prevent injury to persons

1.3 Caring for the environment

> 

Pay special attention to correct disposal proce-

dure for all the packaging materials.

> 

The appliance must not be disposed of with urban 

waste. Contact local waste disposal centres for in-
formation on how to dispose of recyclable waste.

> 

Prior to disposal, cut the power supply cord and 

make it impossible to close the door.

> 

During disposal, avoid damage to the refrigeration 

circuit.

> 

The appliance does not contain hazardous sub-

stances for the atmospheric ozone layer, neither in 
the refrigeration circuit nor in the insulation.

1.4 Cleaning, sanitization and mainte-
nance of the ice and/or water dispenser 
(if present)

Failure to follow the instructions regarding sanitiz-
ing can compromise the hygienic safety of the wa-
ter dispensed.

> 

 When using the appliance for the first time and 

every time the filter is changed, it is recommended 
to let the water flow in the circuit using the “Manual 
Cleaning”  and discard the ice produced in the first 
24 hours.

> 

If the water dispenser has not been used for more 

than 4/5 days, it is advisable to clean the circuit and 
run off the first litre of water.

> 

Reposition the removable water dispenser (if pre-

sent), ensuring your hands are hygienically clean.

> 

Clean the ice bucket or drawer regularly but using 

only drinking water.

> 

The filter must be changed when indicated on the 

control panel or when the ice maker/water dispenser 
has not been used for more than 30 days.

> 

With each filter replacement, sanitise the ice and/

or water distribution system using a food grade dis-
infectant (with sodium hypochlorite), which does not 
alter the characteristics of the materials.
Rinse with at least 2 litres of water before use.

> 

Only original spare parts supplied by the manu-

facturer  should  be  used  when  replacing  compo-
nents in the ice and water dispenser.

> 

Any work on the appliance must be carried out 

by a qualified technician or authorized After-Sales 
Service.

2.INSTALLATION