Fhiaba S5990FZ3 - Инструкция по эксплуатации - Страница 86

www.fhiaba.com · sales@fhiaba.com · Info Line +39 0434 420160

86

11.1  Troubleshooting Guide

If you notice malfunctions in your appliance, use this 
guide before calling for service: this guide can help 
you personally resolve the problem or could provide 
important information to be conveyed to the service 
technician to ensure rapid and effective repair.

Display message and audible alarms.

A malfunction is usually indicated by the display.
Problems that cannot be solved by the user are  
reported through a fault code. Keep in mind,  
however, that in messages or alarms they may  
appear for particular conditions of use or during 
start-up. In these cases, deactivate the audible 
alarm by pressing the Alarm button

 and leave the  

appliance running and limit the opening of the  
doors to the maximum for about 10-12 hours.

The refrigerator or the freezer does not work.

Is the appliance connected to the electrical power 
supply?
Is electrical power available at the electricity socket?
Is the Unit button   activated?
Is the unit in ‘Demo’ Mode?

The refrigerator or the freezer  is warmer than  
usual.

Does the display show a malfunction code?
Is the temperature adjusted correctly?
Were the doors or drawers open for a long period of 
time?
Were large quantities of food recently inserted?
Is the unit in ‘Demo’ Mode?

The appliance remains in function for a long time 
period.

Bear in mind that during very hot weather and with 
very high temperatures in the room it is normal that 
the compressor remains on for prolonged periods of 
time. 
Were the doors or drawers open for a long period of 
time?
Were large quantities of food recently inserted?
Check that the doors are closed and that the food or 
containers do not obstruct the perfect closure of the 
door.
Is one or more compartments in Shopping Mode?

If you hear unusual noises.

It is normal to hear noises from the ventilators or 
compressors during operation or during the defrost 
phase. 

Lower condenser.

 
For cleaning the condenser in the models Classic, 
Integrated or Brilliance follow the instructions: 

> 

Switch off the appliance by pressing the Unit 

button   on the main control panel for approx 3 
seconds. 

> 

Wait approx 30 minutes, until the finned condens-

er cools down to room temperature.

> 

Remove the removable grille under the door.

11. TROUBLESHOOTING GUIDE

> 

Clean it thoroughly from any dust build up as 

shown in the picture, taking care not to damage it. 

> 

Restart the unit again, pressing on the unit bottom 

. for three second.

Warning

The edges of the condenser are sharp, 
therefore use adequate protection for 
the hands and arms when cleaning the  
condenser.

10. CARE AND CLEANING