Холодильник Asko FN31831i - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
EN 27
OTHER
Faults table
Problem
Cause/Solution
Appliance is
connected to the
power supply but is
not working.
Check that the socket is live and that the appliance is switched on.
Appliance cools
continuously for a
long time.
The compressor is operating for a longer time at low capacity (low
energy consumption / high efficiency). This is the most efficient form
of operation. The following factors can also influence the appliance’s
operation:
• The ambient temperature is too high.
• The door has been opened for too long or too frequently.
• The door is not closed properly.
• The door does not seal properly (the seal is dirty, the door is
misaligned or the seal is damaged, etc.).
• Too much fresh food has been put in at the same time.
• Insufficient air circulation around the compressor and condenser.
Check that the ventilation around the appliance is sufficient (see
the separate installation instructions).
Excessive ice
formation in the
freezer.
• The door has been opened for too long or too frequently.
• The door is not closed properly.
• The door does not seal properly (the seal is dirty, the door is
misaligned or the seal is damaged, etc.).
Symbol
D
flashes:
• The door has been opened for too long or too frequently.
• The door does not seal properly (the seal is dirty, the door is
misaligned or the seal is damaged, etc.).
• Too much fresh food has been put in at the same time.
Door does not
open easily.
You are trying to open the appliance’s door just after you have closed
the door. Then opening the door is difficult. When you open the door,
cold air escapes from the appliance and is replaced by warm air
from the surroundings. As this air cools a slight vacuum is created
that makes it more difficult to open the door. The situation returns to
normal after a few minutes, and the door opens easily again.
Some or all of the
LED lighting does
not work.
Consult a service technician about LED lighting that is not working.
You may not try to repair LED lighting.
When you have any doubts about whether your appliance is working properly you should not
immediately assume that it is defective. We recommend that you should in any case check the
points in the following table.
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
