Sharp SJ-44NSL - Инструкция по эксплуатации - Страница 12

13

CARE AND CLEANING 

Some household cleaning chemicals may affect the 
inside surfaces and plastic shelves 
resulting in splitting or cracks occurring.
When cleaning all plastic parts inside 
this refrigerator, only use diluted dish-
washing liquid (soapy water). Make sure 
that all plastic parts are thoroughly 
rinsed with water after cleaning.

  1.

Remove the shelves and pockets from the cabinet and 
door. Wash them in warm soapy dishwashing water; 
rinse in clean water and dry.

  2.

Clean the inside with a cloth soaked in warm soapy 
dishwashing water. Then, use cold water to wipe off 
soapy water.

  3.

Wipe the exterior with a soft cloth each time it is soiled.

  4.

Clean the Magnetic door seal with a toothbrush and 
warm soapy dishwashing water.

  5.

Whenever the refrigerator is moved to clean or reposi-
tioned, the Evaporating pan should be removed and 
cleaned.

NOTE:

   •

Do not use polishing powder, benzine, hot water etc.

   •

If undiluted detergent is used or soapy water is not 
wiped off thoroughly, cracking of plastic par ts can result.

   •

Wipe any food oils adhered to plastic components as 
they can cause cracking of the plastic surface.

   •

The glass shelves weigh approximately 2kg each. Hold 
firmly when removing from the cabinet or carrying.

Evaporating pan;

How to remove/set

Remove the two screws to 
take the Evaporating pan 
off. Please pay attention to 
the safety since the com-
pressor is very hot.

Replacing method 
of the lamp bulb

  1.

Unplug the refrigerator first 
to prevent electric shock.

  2.

Remove the Light cover.

  3.

Replace the lamp bulb with 
the same type.

      Base E12, MAX 15W, T-20

Switching off your refrigerator

If you switch your refrigerator off when you are going away 
for an extended period, remove all food, clean the interior 
thoroughly. Remove the power cord plug from the power 
socket and leave all doors open.

WHAT TO DO BEFORE YOU CALL FOR SERVICE

Before you call for service, check the following points.

IT IS NORMAL

 for the refrigerator to produce the following 

sounds.

   •

Loud noise produced by the compressor when opera-
tion star ts --- Sound becomes quieter after a while.

   •

Loud noise produced once a day by the compressor   
--- Operating sound produced immediately after auto-
matic defrost operation.

   •

Sound of flowing fluid (gurgling sound, fizzing sound)  
--- Sound of refrigerant flowing in pipes (sound may 
become louder from time to time).

   •

Cracking or crunching sound --- Sound produced by 
expansion and contraction of inner walls and internal 
parts during cooling.

   •

Squeaking sound --- Sound produced by expansion and 
contraction of internal parts.

IT IS NORMAL

 that the outside of a cabinet may be hot 

when touched. The hot pipe is in the cabinet in order to pre-
vent dew generation.

IF YOU STILL REQUIRE SERVICE 

Refer to your nearest service agent approved by SHARP.

Compressor

Evaporating 

pan

Light cover

SHARP CORPORATION

TINS-A675CBRZ  05DK   TH   1

Printed in Thailand

12

A675̲english.fm

Page 13

Wednesday, March 9, 2005

4:54 PM