Gorenje RF4141PS4 - Инструкция по эксплуатации - Страница 31

31

Problem:

Possible cause

Solution

Heavy build-up 

of frost, possibly 

also on the door 

seal.

• Door seal is not air-tight 

(possibly after reversing the 

door) .

• Carefully warm the 

leaking sections of the 

door seal with a hair 

dryer (on a cool setting). 

At the same time, shape 

the warmed door seal 

by hand so that it sits 

correctly.

Unusual noises.

• Appliance is not level.

• Readjust the feet.

• The appliance is touching the 

wall or other objects.

• Move the appliance 

slightly.

• A component, e.g. a pipe, on 

the rear of the appliance is 

touching another part of the 

appliance or the wall.

• If necessary, carefully 

bend the component out 

of the way.

The compressor 

dose not start 

immediately 

after changing 

the temperature 

setting.

• This is normal, no error has 

occurred.

• The compressor starts 

after a period of time.

Water on the 

floor or storage 

shelves.

• Water drain hole is blocked.

• Refer the “Cleaning and 

Care” section.

Changing the light bulb

Warning!

 If the light bulb is damaged, DO NOT CHANG IT BY THE USER!

Changing the light bulb carry out by inexperienced person may cause injury or 

serious malfunctioning. It must be replaced by a qualified persons in order to 

avoid a hazard. Contact your local Service Force. Center for help.

Before changing the light bulb, switch off the appliance and unplug it or pull the 

fuse or the circuit breaker.

•  Light bulb data:220-240 V, max. 15 W.

•  To switch off the appliance, set the regulator to position  .

•  Unplug the mains plug. To change the light bulb, undo the screw.

•  Press the light bulb cover and slide it backwards.

•  Change the defective light bulb.

•  Refit the light bulb cover and the screw.

•  Put the refrigerator back into operation.