AEG S86340KG1 - Инструкция по эксплуатации - Страница 17

Clean the condenser (black grill) and the compressor at the back of the appliance with a

brush or a vacuum cleaner. This operation will improve the performance of the appliance

and save energy consumption.
Take care of not to damage the cooling system.

When moving the cabinet, lift it by the front edge to avoid scratching the floor.

Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the

plastics used in this appliance. For this reason use a soft cloth rinsed in warm water and

neutral soap emulsion for cleaning external surfaces.
Do not use detergents or abrasive paste as these will damage the paint, or stainless steel

anti finger print coating.

After cleaning, reconnect the equipment to the mains supply.

Replacing the Clean Air Control filter

To get the best performance replace the Clean Air Control filter once every year.

New active filters can be purchased from your local dealer.

Refer to "Installation of the Clean Air Control filter" for instructions.

Cleaning the ventilation grille

The ventilation grille can be removed for washing.

Make sure the door is open and then:

1. Loosen the upper edge of the grille by

pulling outward/downward.

2. Pull the grille straight out to completely

remove it.

3. Vacuum clean under the cabinet.

Care and cleaning

17