Ryobi ONE+ RY18LMX40A-150 5133004585 - Инструкция по эксплуатации - Страница 6

The battery pack has overheat protection. 

Excessive temperatures will cause the battery 

to stop powering the product. If the battery 

pack is too warm, allow it to cool down before 

resuming operation. If the product still does 

not work, recharge the battery.

NOTE:

 The battery pack LED indicator will 

not work if the battery protection feature has 

caused the battery pack to stop powering 

the product. Turn off the product or remove 

the battery pack from the product and the 

battery pack LED indicator will resume normal 

function.
The product can be used with one battery 

in port 1 only, or for added run time, with 

batteries in ports 1 and 2.

TELESCOPIC HANDLE

The product is equipped with a telescopic 

handle that can be adjusted for storage and 

operation. The telescopic handle must be fully 

extended when setting up the product for use.

NOTE:

 The product will not function if the 

telescopic handle is not fully extended and 

the two latches are not in the correct position.

ON/OFF LEVER

B

A

Press the start button and then squeeze 

the on/off lever (A or B) to start the product. 

Release the start button and keep squeezing 

the on/off lever to run the blade. Release the 

on/off lever to stop the blade.

GENERAL MOWING TIPS

The run time of the battery depends on the 

condition, length, and density of the grass.
Adjust the cutting height of the lawnmower to 

suit the current condition of the lawn.

■

For best performance, always cut off one-

third or less of the total height of the grass.

■

When cutting long grass, reduce walking 

speed to allow for more effective cutting 

and a proper discharge of the clippings.

■

Do not cut wet grass; it will stick to the 

underside of the deck and prevent proper 

collection or discharge of grass clippings.

■

New or thick grass may require a higher 

cutting height.

■

To collect the grass cuttings for disposal, 

remove the mulching plug and fit the 

grass catcher, making sure that the 

grass discharge chute cover is properly 

closed. Empty the grass catcher regularly; 

otherwise, the discharge chute will become 

blocked with grass cuttings.

■

If you are making a light cut and wish 

for the grass cuttings to remain on the 

lawn, fit the mulching plug, and close the 

grass discharge chute cover to cover the 

discharge opening. It is not necessary to fit 

the grass catcher in this case.

■

The product is designed to operate and cut 

most effectively when moving forwards.

■

A higher cutting height extends the run 

time of the battery.

TRANSPORTATION AND STORAGE

■

Turn off the product, and remove the 

isolator key and the battery pack. Make 

sure that all moving parts have come to a 

complete stop. Allow the product to cool 

down before storing or transporting.

■

Clean all foreign materials from the product. 

Store the product in a cool, dry, and well-

ventilated place that is inaccessible to 

children. Keep the product away from 

corrosive agents such as garden chemicals 

and de-icing salts. Do not store the product 

outdoors.

■

For transportation in vehicles, remove 

the isolator key, and secure the product 

against movement or falling to prevent 

injury to persons or damage to the product.

 WARNING

Use extreme caution when lifting or tilting 

the product for maintenance, cleaning, 

storage, or transportation. The blade is 

sharp; keep all body parts away from the 

blade while it is exposed.

4

| English