Ryobi ONE+ RY18LMX40A-150 5133004585 - Инструкция по эксплуатации - Страница 5

●

not all four wheels are on the ground

●

the grass discharge chute is exposed 

and is not protected by the grass catcher 

and grass discharge chute cover

●

hands and feet of all persons are not 

clear of the cutting enclosure

■

Never operate the product if the on/off 

switch on the handlebar does not properly 

start and stop the product.

■

Never attempt to lock the on/off switches in 

the on position; this is extremely dangerous.

■

Do not force the product. It will do the job 

better and safer at the speed for which it 

was designed. 

■

Stop the blade when crossing gravel 

surfaces. 

■

Do not pull the product backwards unless 

absolutely necessary. If you must back the 

product away from a wall or obstruction, 

first look down and behind to avoid tripping 

or pulling the product over your feet. 

■

Turn off the motor and allow the blade 

to stop if the product has to be tilted for 

transportation when crossing surfaces 

other than grass, and when transporting 

the product to and from the work area.

■

Never use the product with defective guards 

or shields, or without safety devices, such 

as deflectors or grass collectors, in place.

■

Do not tilt the pro

■

duct when turning on the motor or while the 

motor is running. If absolutely necessary, 

you may raise the front of the lawnmower 

by no more than 5 cm to enable easier 

starting. Press down on the handlebar to 

achieve this. Always return the lawnmower 

to its normal position with all wheels 

on the ground before cutting. Tilting 

the lawnmower exposes the blade and 

increases the probability of objects being 

thrown and accidental contact with the 

blade.

■

Turn on the motor carefully according to 

instructions and keep hands and feet away 

from blades. Do not put hands or feet near 

or under rotating parts.

■

Never pick up or carry the product while it 

is running. 

■

Turn off the product, and remove the 

isolator key and the battery pack. Make 

sure that all moving parts have come to a 

complete stop:

●

whenever leaving the product 

unattended (including disposal of grass 

clippings)

●

before clearing blockages or unclogging 

discharge chute

●

before checking, cleaning, or working on 

the product

●

before removing the grass catcher or 

opening the grass discharge chute cover

●

after striking a foreign object; inspect the 

product for damage and make repairs 

as necessary before restarting and 

operating the product

●

If the product starts to vibrate abnormally 

(check immediately)

–

inspect for damage, particularly the 

blades

–

replace or repair any damaged parts

–

check for and tighten any loose parts

■

Avoid holes, ruts, bumps, rocks, property 

stakes, or other hidden objects. Uneven 

terrain could cause a slip-and-fall accident.

■

Always ensure that the motor control cable 

is never trapped, pinched or otherwise 

damaged during assembly or when folding 

the handle.

ADDITIONAL BATTERY SAFETY 

WARNINGS

 WARNING

To  reduce  the  risk  of  fire,  personal  injury, 

and product damage due to a short circuit, 

never immerse your tool, battery pack or 

charger in fluid or allow a fluid to flow inside 

them.  Corrosive  or  conductive  fluids,  such 

as seawater, certain industrial chemicals, 

and bleach or bleach-containing products, 

etc., can cause a short circuit.

PRODUCT FEATURES

OVERLOAD AND OVERHEAT PROTECTION

The product has an overload protection 

device. When overloading is detected, the 

product will automatically turn off. If the 

overload protector is actuated, the on/off lever 

must be released. Squeeze the on/off lever to 

restart the product.

3

English |

EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR