Ryobi ONE+ RLM18X41H240 5133002803 - Инструкция по эксплуатации - Страница 5

●

the grass discharge chute is exposed

and is not protected by the grass catcher 

and grass discharge chute cover.

●

hands and feet of all persons are not

clear of the cutting enclosure.

■

Never operate the product if the on/off

switch on the handlebar does not properly

start and stop the product.

■

Never attempt to lock the on/off switches in

the on position, this is extremely dangerous.

■

Do not force the product. It will do the job

better and safer at the speed for which it

was designed.

■

Stop the blade when crossing gravel

surfaces.

■

Do not pull the product backwards unless

absolutely necessary. If you must back the

product away from a wall or obstruction,

first look down and behind to avoid tripping

or pulling the product over your feet.

■

Stop the motor and allow the blade to

stop if the product has to be tilted for

transportation when crossing surfaces

other than grass, and when transporting

the product to and from the work area.

■

Never use the product with defective

guards or shields, or without safety

devices, for example, deflectors and/ or

grass collectors, in place.

■

Do not tilt the product when switching on

the motor or while the motor is running. If

absolutely necessary, you may raise the

front of the lawn mower by no more than

5 cm to enable easier starting. Press down

on the handlebar to achieve this. Always

return the mower to its normal position with

all wheels on the ground before cutting.

Tilting the mower exposes the blade and

increases the probability of objects being

thrown and accidental contact with the

blade.

■

Switch on the motor carefully according to

instructions and keep hands and feet away

from blades. Do not put hands or feet near

or under rotating parts.

■

Never pick up or carry the product while it

is running.

■

Stop the motor and remove isolator key.

Make sure all moving parts have come to

a complete stop before:

●

leaving the product unattended 

(including disposal of grass clippings).

●

clearing blockages or unclogging

discharge chute

●

checking, cleaning, or working on the

product

●

inspecting the product after striking

a foreign object (and make repairs

as necessary before restarting and

operating the product)

●

removing the grass catcher or opening

the grass discharge chute cover

●

If the product starts to vibrate abnormally, 

check immediately to:

–

inspect for damage, particularly the

blades

–

replace or repair any damaged parts

–

check for and tighten any loose parts

■

Avoid holes, ruts, bumps, rocks, property

stakes, or other hidden objects. Uneven

terrain could cause a slip-and-fall accident.

■

Always ensure the motor control cable

is never trapped, pinched or otherwise

damaged during assembly or when folding

the handle.

PRODUCT FEATURES

OVERLOAD AND OVERHEAT PROTECTION

The product has an overload protection 

device. When overloading is detected, the 

product will automatically switch off. If the 

overload protector is actuated, the on-off 

button must be released. Press the on-off 

button to restart the product.
The battery pack has overheat protection. 

Excessive temperatures will cause the battery 

to stop powering the product. Feel the battery 

pack; if it is too warm, allow it to cool down 

before resuming operation. If the product still 

does not work, recharge the battery.

NOTE:

 The battery pack LED indicator will 

not work if the battery protection feature has 

caused the battery pack to stop powering the 

product. Release the on-off button or remove 

the battery pack from the product and the 

battery pack LED indicator will resume normal 

function.

TELESCOPIC HANDLE

The product is equipped with a telescopic 

handle that can be adjusted for storage and 

operation. The telescopic handle must be fully 

extended when setting up the product for use.

3

English 

|

EN

FR

DE

ES

IT

NL

PT

DA

SV

FI

NO

RU

PL

CS

HU

RO

LV

LT

ET

HR

SL

SK

BG

UK

TR