Ryobi ONE+ RLM18X41H240 5133002803 - Инструкция по эксплуатации - Страница 7

should be properly repaired or replaced by 

an authorised service centre.

■

Check all nuts, bolts and screws at frequent 

intervals for proper tightness to ensure the

product is in safe working condition.

■

Be careful during adjustment of the product

to prevent entrapment of the fingers

between moving blades and fixed parts of

the product.

■

When servicing the blades, be aware that

even though the power source is switched

off, the blades can still be moved.

■

The blade on the product is sharp. Use

extreme caution and wear heavy-duty

gloves when fitting, replacing, cleaning or

checking bolt security.

■

Replace damaged blades and bolts in sets

to preserve balance.

■

The blade bolts must be adequately

tightened. 

See the manufacturer’s 

recommendations for blade bolt torque

which can be found in the product

specification table in this manual

.

CLEARING BLOCKAGES

■

Stop the product, remove the isolator key

and the battery. Make sure that all moving

parts have come to a complete stop.

■

Always wear heavy-duty gloves when

checking or clearing a blockage.

■

The blades are sharp and the blockage

itself could be a sharp object.

■

Remove the grass catcher, check for and

carefully clear obstructions.

■

Check the grass discharge chute for

blockages and carefully clear.

■

Turn the product on its side, check its

underside, and the area around the

blade. If any blockages are found, remove

carefully. Remember the blade may move

during cleaning.

RESIDUAL RISKS

Even when the product is used as prescribed, 

it is still impossible to completely eliminate 

certain residual risk factors. The following 

hazards may arise in use and the operator 

should pay special attention to avoid the 

following: 

■

injury caused by vibration

●

Always use the right tool for the job. Use

designated handles and restrict working 

time and exposure. 

■

injury caused by noise

●

Exposure to noise can cause hearing

injury. Wear ear protection and limit

exposure.

■

injury from contact with the blades

■

injury caused by thrown objects

RISK REDUCTION

It has been reported that vibrations from 

handheld tools may contribute to a condition 

called Raynaud’s Syndrome. Symptoms may 

include tingling, numbness and blanching of 

the 

fi

 ngers, usually apparent upon exposure 

to cold. Hereditary factors, exposure to cold 

and dampness, diet, smoking and work 

practices are all thought to contribute to the 

development of these symptoms. There are 

measures that can be taken by the operator to 

possibly reduce the effects of vibration:

■

Keep your body warm in cold weather.

When operating the product, wear gloves

to keep the hands and wrists warm. It is

reported that cold weather is a major factor

contributing to Raynaud’s Syndrome.

■

After each period of operation, exercise to

increase blood circulation.

■

Take frequent work breaks. Limit the

amount of exposure per day.

If you experience any of the symptoms of this 

condition, immediately discontinue use and 

see your physician.

 WARNING

Injuries may be caused, or aggravated, by 

prolonged use of a tool.  When using any 

tool for prolonged periods, ensure you take 

regular breaks.

KNOW YOUR PRODUCT

See page 

192

.

Parts

1. On-off 

button

2. Start 

button

3. Motor control cable

4. Telescopic 

handle

5. Grass catcher full indicator

6. Height adjustment lever

7. Battery 

door

5

English 

|

EN

FR

DE

ES

IT

NL

PT

DA

SV

FI

NO

RU

PL

CS

HU

RO

LV

LT

ET

HR

SL

SK

BG

UK

TR