Ryobi MAX POWER RY36LMMX51A-140 36В 5133004591 - Инструкция по эксплуатации - Страница 6

operation. The telescopic handle must be fully 

extended when setting up the product for use.

NOTE:

 The product will not function if the 

telescopic handle is not fully extended and 

the two latches are not in the correct position.

GENERAL MOWING TIPS

The run time of the battery depends on the 

condition, length, and density of the grass.
Adjust the cutting height of the lawnmower to 

suit the current condition of the lawn.

■

For best performance, always cut off one-

third or less of the total height of the grass.

■

When cutting long grass, reduce walking 

speed to allow for more effective cutting 

and a proper discharge of the clippings.

■

Do not cut wet grass; it will stick to the 

underside of the deck and prevent proper 

collection or discharge of grass clippings.

■

New or thick grass may require a higher 

cutting height.

■

The product is designed to operate and cut 

most effectively when moving forwards.

■

A higher cutting height extends the run 

time of the battery pack.

TRANSPORTATION AND STORAGE

■

Turn off the product, and remove the 

isolator key and the battery pack. Make 

sure that all moving parts have come to a 

complete stop. Allow the product to cool 

down before storing or transporting.

■

Clean all foreign materials from the product. 

Store the product in a cool, dry, and well-

ventilated place that is inaccessible to 

children. Keep the product away from 

corrosive agents such as garden chemicals 

and de-icing salts. Do not store the product 

outdoors.

■

For transportation in vehicles, remove 

the isolator key, and secure the product 

against movement or falling to prevent 

injury to persons or damage to the product.

 WARNING

Use extreme caution when lifting or tilting 

the product for maintenance, cleaning, 

storage, or transportation. The blade is 

sharp; keep all body parts away from the 

blade while it is exposed.

TRANSPORTING LITHIUM BATTERIES

Transport the battery in accordance with local 

and national provisions and regulations.
Follow all special requirements on packaging 

and labelling when transporting batteries by a 

third party. Ensure that no batteries can come 

in contact with other batteries or conductive 

materials while in transport by protecting 

exposed connectors with insulating, non-

conductive caps or tape. Do not transport 

batteries that are cracked or leaking. Check 

with the forwarding company for further advice.

MAINTENANCE

 WARNING

Use only original manufacturer’s 

replacement parts, accessories and 

attachments. Failure to do so can cause 

possible injury, can contribute to poor 

performance, and may void your warranty.

 WARNING

Servicing requires extreme care and 

knowledge and should be performed only 

by a quali

fi

 ed service technician. Have the 

product serviced by an authorised service 

centre only. When servicing, use only 

original replacement parts.

■

Turn off the product, and remove the isolator 

key and the battery pack. Make sure that all 

moving parts have come to a complete stop 

before any cleaning or maintenance task.

■

You may make adjustments and repairs 

described in this manual. For other repairs, 

contact an authorised service centre.

■

Replace worn or damaged part for safety.

■

After each use, clean the product with a 

soft, dry cloth. Any part that is damaged 

should be properly repaired or replaced by 

an authorised service centre.

■

Check all nuts, bolts, and screws at frequent 

intervals for proper tightness to ensure the 

product is in safe working condition.

■

Be careful during adjustment of the product 

to prevent entrapment of the fingers between 

moving blades and fixed parts of the product.

■

When servicing the blades, be aware that 

even though the power source is turned off, 

the blades can still be moved.

4

| English