Ryobi MAX POWER RY36LMMX51A-140 36В 5133004591 - Инструкция по эксплуатации - Страница 5

■

Never operate the product if the on/off 

switch on the handlebar does not properly 

start and stop the product.

■

Never attempt to lock the on/off switches in 

the on position; this is extremely dangerous.

■

Do not force the product. It will do the job 

better and safer at the speed for which it 

was designed. 

■

Stop the blade when crossing gravel 

surfaces. 

■

Do not pull the product backwards unless 

absolutely necessary. If you must back the 

product away from a wall or obstruction, 

first look down and behind to avoid tripping 

or pulling the product over your feet. 

■

Turn off the motor and allow the blade 

to stop if the product has to be tilted for 

transportation when crossing surfaces 

other than grass, and when transporting 

the product to and from the work area.

■

Never use the product with defective guards 

or shields, or without safety devices, such 

as deflectors  or grass collectors, in place.

■

Do not tilt the product when turning on 

the motor or while the motor is running. If 

absolutely necessary, you may raise the 

front of the lawnmower by no more than 5 

cm to enable easier starting. Press down 

on the handlebar to achieve this. Always 

return the lawnmower to its normal position 

with all wheels on the ground before cutting. 

Tilting the lawnmower exposes the blade and 

increases the probability of objects being 

thrown and accidental contact with the blade.

■

Turn on the motor carefully according to 

instructions and keep hands and feet away 

from blades. Do not put hands or feet near 

or under rotating parts.

■

Never pick up or carry the product while it 

is running. 

■

Turn off the product, and remove the 

isolator key and the battery pack. Make 

sure that all moving parts have come to a 

complete stop:

●

whenever leaving the product unattended 

(including disposal of grass clippings)

●

before clearing blockages or unclogging 

discharge chute

●

before checking, cleaning, or working on 

the product

●

after striking a foreign object; inspect the 

product for damage and make repairs 

as necessary before restarting and 

operating the product

●

If the product starts to vibrate abnormally 

(check immediately)

–

inspect for damage, particularly the 

blades

–

replace or repair any damaged parts

–

check for and tighten any loose parts

■

Avoid holes, ruts, bumps, rocks, property 

stakes, or other hidden objects. Uneven 

terrain could cause a slip-and-fall accident.

■

Always ensure that the motor control cable is 

never trapped, pinched or otherwise damaged 

during assembly or when folding the handle.

ADDITIONAL BATTERY SAFETY 

WARNINGS

 WARNING

To reduce the risk of 

fi

 re, personal injury, 

and product damage due to a short circuit, 

never immerse your tool, battery pack or 

charger in 

fl

 uid or allow a 

fl

 uid to 

fl

 ow inside 

them. Corrosive or conductive 

fl

 uids,  such 

as seawater, certain industrial chemicals, 

and bleach or bleach-containing products, 

etc., can cause a short circuit.

PRODUCT FEATURES

OVERLOAD AND OVERHEAT PROTECTION

The product has an overload protection device. 

When overloading is detected, the product will 

automatically turn off. If the overload protector 

is actuated, the on/off lever must be released. 

Squeeze the on/off lever to restart the product.
The battery pack has overheat protection. 

Excessive temperatures will cause the battery 

to stop powering the product. If the battery 

pack is too warm, allow it to cool down before 

resuming operation. If the product still does 

not work, recharge the battery.

NOTE:

 The battery pack LED indicator will 

not work if the battery protection feature has 

caused the battery pack to stop powering the 

product. Turn off the product or remove the 

battery pack from the product and the battery 

pack LED indicator will resume normal function.

TELESCOPIC HANDLE

The product is equipped with a telescopic 

handle that can be adjusted for storage and 

3

 English 

|

EN

FR

DE

ES

IT

NL

PT

DA

SV

FI

NO

RU

PL

CS

HU

RO

LV

LT

ET

HR

SL

SK

BG

UK

TR