GreenWorks G24LM33K2 - Инструкция по эксплуатации - Страница 4

Газонокосилки GreenWorks G24LM33K2 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 164
Загружаем инструкцию
background image

3.5

SET THE BLADE HEIGHT

The machine can be set to different blade heights.

 

WARNING

Remove the battery pack and safety key before turning over
the machine to adjust the cutting height.

Figure 6

1. Turn the machine over to access the front and rear cutting

height adjustment.

2. Push the axle forward to unlock the cutting height

adjustment.

3. Move the axle into one of the three positions. Make sure

that the two sides of the axle are in the same height.

4. Make sure that the four wheels are assembled in the same

cutting height and scroll smoothly and unclogged.

3.6

INSTALL THE BATTERY PACK

Figure 7

 

WARNING

If the battery pack or charger is damaged, replace the
battery pack or the charger.

Stop the machine and wait until the engine stops before
you install or remove the battery pack.

Read, know, and follow the instructions in the battery
and charger manual.

1. Open the battery door.
2. Align the lift ribs on the battery pack with the grooves in

the battery compartment.

3. Push the battery pack into the battery compartment until

the battery pack locks into place.

4. When you hear a click, the battery pack is installed.
5. Close the battery door.

 

NOTE

The engine starts only when you put in the safety key.

3.7

REMOVE THE BATTERY PACK

Figure 7

1. Open the battery door.
2. Remove the safety key.
3. Push and hold the battery release button.
4. Remove the battery pack from the machine.

4

OPERATION

 

WARNING

Wear eye protection during operation.

4.1

START THE MACHINE

Figure 8

 

NOTE

Install the grass catcher before mowing.

1. Put in the safety key.
2. Push and hold the start button.
3. While you hold the start button, pull the switch box

handle in the direction of the handle bar.

4. Release the start button to start the machine.

4.2

STOP THE MACHINE

Figure 8

1. Release the switch box handle to stop the machine.

 

WARNING

Wait until the blade fully stops before you start the machine
again. Do not quickly turn the machine off and on.

 

WARNING

Always remove the safety key and battery pack after you
complete the work.

4.3

EMPTY THE GRASS CATCHER

1. Stop the machine.
2. Remove the safety key.
3. Remove the battery pack.
4. Open the rear discharge door and hold it.
5. Hold the grass catcher by its handle and unhook it from

the slots.

6. Close the rear discharge door.
7. Empty the grass catcher.

4.4

OPERATE ON SLOPES

 

WARNING

Do not mow on the slopes with incline more than 15°. If
you are not comfortable, do not mow on a slope.

Do not go up and down on a slope, mow across the face
of the slope. Be careful when you change the direction on
a slope.

Monitor the holes, ruts, rocks, and other hidden objects
that can cause you to fall. Remove all obstacles such as
rocks and tree limbs.

Make sure that your footing is stable. If you are out of
balance, release the handle switch immediately.

Do not mow near drop-offs, ditches, or embankments.

6

English

EN

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к GreenWorks G24LM33K2?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"