AL-KO Highline 476 SPI 119737 - Инструкция по эксплуатации - Страница 28

Газонокосилки AL-KO Highline 476 SPI 119737 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 344
Загружаем инструкцию
background image

GB

Translation of original user instructions

28

Petrol lawnmower

Maintenance and care

Caution - Risk of injury!

 

Before carrying our any care or maintenance 
work, always switch off the motor and pull out 
the spark plug connector.

 

The motor may continue running. After switching 
off, make sure the motor has stopped turning.

 

Always wear working gloves when carrying out 
maintenance or repair work.

 

„

Check the grass catcher regularly for wear, and to 
ensure it is working correctly

 

„

Clean the equipment after each use

 

„

Do not wash the equipment by hosing or spraying 
with water
Water in

fi

 ltration can cause faults (in the ignition 

system, carburettor)

 

„

Check the mower blade regularly for damage

 

„

Always replace the muf

fl

 er if faulty 

Tilting the lawnmower

Depending on the motor manufacturer:

 

„

the carburettor / air 

fi

 lter must be facing upward 

(  

23

)

 

„

the spark plug must be facing upward (  

24

)

Follow the operating instructions of the motor 
manufacturer!

Resharpening/replacing the mower blade

 

„

Blunt or damaged blades should be 
resharpened / replaced only at a service point or by 
an authorised specialist

 

„

Resharpened blades must be rebalanced

Caution!

Blades that have not been rebalanced can cause 
serious vibrations, and may result in damage to 
the lawnmower.

Charging the starter battery (optional)

The starter battery is maintenance-free and is normally 
charged by the lawnmower. 
In certain cases, however, the battery will need to be 
charged by the user:

 

„

Before the initial start-up of the lawnmower

 

„

If discharged, before the winter season, or if left 
unused for long periods (> 6 months)

Charging procedure:

1.  Take the battery charger out of the battery box.

2.  Disconnect the battery cable from the motor cable 

(  

25

).

3.  Connect the battery cable with the charger cable 

(  

26

).

4.  Connect the charger to the mains supply. 

The mains voltage must match the operating 
voltage of the charger.

The required charging time is about 36 hours. 
Use only the original battery charger supplied.

Caution!

 

Charge the starter battery only in dry, well-
ventilated rooms.

 

Do not start up the lawnmower while the battery 
is charging.

Care of the motor

Changing the motor oil

1.  Have a suitable container ready to collect the used 

oil.

2.  Drain or suction off all the oil through the oil 

fi

 ller 

opening.

Dispose of used motor oil in a manner that is 
compatible with the environment! 
We recommend to collect the used oil in a closed 
container and to deliver it to a suitable recycling 
or service station.

Used oil should not be

 

disposed of with domestic rubbish

 

poured into the sewage system or drains 

 

poured out onto the ground

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к AL-KO Highline 476 SPI 119737?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"