RYOBI RIW18X-0 (5133004960) - Инструкция по эксплуатации - Страница 3

Safety, performance, and dependability have been given 
top priority in the design of your impact wrench.

INTENDED USE

The impact wrench is intended to be used only by adults 
who have read and understood the instructions and 
warnings in this manual, and can be considered responsible 
for their actions.
The product is intended for fastening and removing screws 
and bolts using an impact socket.
The product is intended for consumer use only.
Do not use the product for any other purpose. Use of the 
product for operations different from intended could result 
in a hazardous situation.

WARNING!

Read all safety warnings, instructions, 

illustrations and specifications provided with this 
power tool.

 Failure to follow all instructions listed below 

may result in electric shock, 

fi

 re and/or serious injury.

Save all warnings and instructions for future reference.

IMPACT WRENCH SAFETY WARNINGS

■

Hold the power tool by insulated gripping surfaces, 
when performing an operation where the fastener
may contact hidden wiring.

 Fasteners contacting a

“live” wire may make exposed metal parts of the power 
tool “live” and could give the operator an electric shock.

■

Clamp workpiece with a clamping device. Unclamped
workpieces can cause severe injury and damage.

■

Dust created by operating the product can cause
respiratory injury. Wear appropriate dust control mask
with filters suitable for protecting against particles from
the material being worked on.

■

Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged
periods, ensure you take regular breaks.

■

The product will restart automatically if stalled. Switch
off the product immediately if it stalls. Do not switch on
the product again while it is still stalled, as doing so
could trigger a sudden recoil with a high reactive force.
Determine why the product stalled and rectify this,
paying heed to the safety instructions.

■

Ambient temperature range for tool during operation is
between 0 

˚

C and 40

˚

 C.

■

Ambient temperature range for tool storage is between
0 

˚

C and 40

˚

 C.

■

The recommended ambient temperature range for the
charging system during charging is between 10 

˚

C and

38

˚

 C.

ADDITIONAL BATTERY SAFETY WARNINGS

■

To reduce the risk of fire, personal injury, and product
damage due to a short circuit, never immerse your
tool, battery pack or charger in fluid or allow a fluid to
flow inside them. Corrosive or conductive fluids, such
as seawater, certain industrial chemicals, and bleach
or bleach-containing products, etc., can cause a short
circuit.

■

Ambient temperature range for battery during use is

between 0°C and 40°C.

■

Ambient temperature range for battery storage is
between 0°C and 20°C.

TRANSPORTING LITHIUM BATTERIES

Transport the battery in accordance with local and national 
provisions and regulations.
Follow all special requirements on packaging and labelling 
when transporting batteries by a third party. Ensure that 
no batteries can come in contact with other batteries 
or conductive materials while in transport by protecting 
exposed connectors with insulating, non-conductive caps 
or tape. Do not transport batteries that are cracked or 
leaking. Check with the forwarding company for further 
advice.

KNOW YOUR PRODUCT

See page 57.

1. Anvil
2.  Direction of rotation selector
3.  Variable speed switch trigger
4.  Handle, insulated gripping surface
5. LED worklight
6. Low speed
7. Medium speed
8. High speed
9. “A” mode*
10. Mode selection button
11. Battery port
12. Belt clip
13. Belt clip screw
14. Operator’s manual
15. Battery pack
16. Charger
*The “A” mode is a mode designed to give the user greater 
control in application and reduce damage to the fastener
or work surface by automatically shutting the tool off after
the tool senses the mechanism impacting for approximately 
one second.

MAINTENANCE

■

The product should never be connected to a power
supply when assembling parts, making adjustments,
cleaning, performing maintenance, or when the product 
is not in use. Disconnecting the product from the power 
supply will prevent accidental starting that could cause
serious injury.

■

When servicing, use only original manufacturer’s
replacement parts, accessories and attachments.
Use of any other parts may create a hazard or cause
product damage.

■

Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to various types of commercial
solvents and may be damaged by their use. Use clean
cloths to remove dirt, carbon dust, etc.

■

Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which may result in serious personal
injury.

ENGLISH

EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
EL

3

Original Instructions